CO A/C Dash, Firewall, Low Hump, & Other Cab Cuts - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

718jwh · 04-17-2016, 08:25 PM

Ok looks good for cab corner price for shipping to 60563 PM payment info

Thanks

DarkKnightWong · 04-17-2016, 09:07 PM

Quote:

Originally Posted by 402Bowtie

How about this for $50 shipped via money order or $51.80 shipped via Paypal?

That sounds perfect sir. I can PayPal you the 51.80

What's your PayPal address ?

Thanks
allen

**402Bowtie** · 04-18-2016, 11:35 PM

Quote:

Originally Posted by 718jwh

Ok looks good for cab corner price for shipping to 60563 PM payment info

Thanks

So I am out of large boxes and don't have material to make one. I think I can pick one up from U-haul for less than $6. Then I expect shipping to be between $22 and $37. Would you be willing to pay $45 + $6 +35 = $86 + paypal fees = $88.88. If shipping is less than $35, I will reimburse you the difference, and i'll eat the cost if it is more than $35. I'll go ahead and PM you my paypal address. Let me know what you think.

**402Bowtie** · 04-18-2016, 11:37 PM

Quote:

Originally Posted by phatzilla

I will take the roof secrion

Sent you a PM a couple days ago. Ready to ship. PM me if you have any questions.

718jwh · 04-25-2016, 10:58 AM

I am fine with the price for the cab corner, I did not get a PM from you, send me the info and I will get you paid

Thanks

**402Bowtie** · 04-25-2016, 11:13 AM

Quote:

Originally Posted by 718jwh

I am fine with the price for the cab corner, I did not get a PM from you, send me the info and I will get you paid

Thanks

Sorry about that. PM sent just now.

**402Bowtie** · 04-25-2016, 11:16 AM

phatzilla, where did you go?

Hoping you didn't change your mind after all that....I definitely had more time in it than the $50 I was going to charge you for the roof...

**402Bowtie** · 04-29-2016, 02:36 PM

Quote:

Originally Posted by 402Bowtie

So I am out of large boxes and don't have material to make one. I think I can pick one up from U-haul for less than $6. Then I expect shipping to be between $22 and $37. Would you be willing to pay $45 + $6 +35 = $86 + paypal fees = $88.88. If shipping is less than $35, I will reimburse you the difference, and i'll eat the cost if it is more than $35. I'll go ahead and PM you my paypal address. Let me know what you think.

Quote:

Originally Posted by 718jwh

I am fine with the price for the cab corner, I did not get a PM from you, send me the info and I will get you paid

Thanks

718jwh, shipped today. Tracking info updated in Paypal. Should be there by Thursday. It was $36.91 to ship, and I told you I would cover anything over $35, so you should be good to go. Hope the part helps you out.

olblue60@aol.com · 04-30-2016, 06:03 AM

I would be interested in the left inner kick panel. Is it still available? I don't need the air box. Thanks

John

**402Bowtie** · 04-30-2016, 11:54 AM

Quote:

Originally Posted by olblue60@aol.com

I would be interested in the left inner kick panel. Is it still available? I don't need the air box. Thanks

John

How high do you need the cut? I would like $50 shipped if I continue my cut shown in the picture. The cut would be 6 - 6.5" above the inside floor. I would also cut a portion of the floor along the lower edge of the kick panel. It has some surface rust, as shown in the pic, but appears pretty solid based on what is viewable at this time.

Let me know what you think!

69rut · 05-03-2016, 06:51 AM

Quote:

Originally Posted by 402Bowtie

I have the drip rail on both sides starting at the roof seam and all the way down. Cutting out 1" on each side of the drip rail, I would want $20 each plus shipping. If you just wanted one side, I would probably give you the passenger side. Let me know....

Sorry no engine stands.

I could use one side as I only need a couple inches. My location is 23663, PM also sent.

**402Bowtie** · 05-04-2016, 01:53 PM

Quote:

Originally Posted by 69rut

I could use one side as I only need a couple inches. My location is 23663, PM also sent.

PM Sent

**402Bowtie** · 05-04-2016, 01:54 PM

Last Call! Planning to go to the scrap yard this weekend....

**402Bowtie** · 05-05-2016, 01:44 PM

Pictures for 69rut. I have about 15" on the driver side and 17" on the passenger side....both measured from the rear outer seam. Some paint chips and surface rust, but both drip rails are straight.

**402Bowtie** · 05-06-2016, 02:27 PM

69rut, have you decided which side (or both) you would prefer? I need to make the cut tonight, as it is going to the crusher tomorrow.

69rut · 05-06-2016, 02:49 PM

Either one is plenty long for what I need. Cut off the easiest one for you and I'll send the funds later this afternoon.

69rut · 05-07-2016, 07:49 AM

Funds sent. Thanks.

04-17-2016, 08:25 PM	#51
718jwh Registered User Join Date: Dec 2014 Location: naperville Il Posts: 236	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts Ok looks good for cab corner price for shipping to 60563 PM payment info Thanks

04-25-2016, 10:58 AM	#55
718jwh Registered User Join Date: Dec 2014 Location: naperville Il Posts: 236	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts I am fine with the price for the cab corner, I did not get a PM from you, send me the info and I will get you paid Thanks

04-25-2016, 11:16 AM	#57
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,727	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts phatzilla, where did you go? Hoping you didn't change your mind after all that....I definitely had more time in it than the $50 I was going to charge you for the roof... Attached Images

04-30-2016, 06:03 AM	#59
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts I would be interested in the left inner kick panel. Is it still available? I don't need the air box. Thanks John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

05-04-2016, 01:54 PM	#63
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,727	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts Last Call! Planning to go to the scrap yard this weekend....

05-05-2016, 01:44 PM	#64
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,727	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts Pictures for 69rut. I have about 15" on the driver side and 17" on the passenger side....both measured from the rear outer seam. Some paint chips and surface rust, but both drip rails are straight. Attached Images

05-06-2016, 02:27 PM	#65
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,727	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts 69rut, have you decided which side (or both) you would prefer? I need to make the cut tonight, as it is going to the crusher tomorrow.

05-06-2016, 02:49 PM	#66
69rut Registered User Join Date: Sep 2006 Location: SE Virginia Posts: 158	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts Either one is plenty long for what I need. Cut off the easiest one for you and I'll send the funds later this afternoon. __________________ trailers are for boats

05-07-2016, 07:49 AM	#67
69rut Registered User Join Date: Sep 2006 Location: SE Virginia Posts: 158	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts Funds sent. Thanks. __________________ trailers are for boats



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.