GMP/ACME C10 Diecast - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Already Gone** · 05-06-2016, 02:24 AM

Apparently these two are being released this summer. They are based on the old Highway61 C10 tooling. There are 1:18th and will be on the high side of pricing.

**special-K** · 05-06-2016, 08:32 AM

Thanks! I'll have to look for those. I like the 750 pieces part. If I only get one I like the green one. Not a fan of a pickup painted up as a race car when such a truck never ran such a race. But I guess it could be a support vehicle for the team or a shop truck. It's not like it has a number painted on it.

silvereagle07 · 05-09-2016, 12:24 PM

Nice! I will definitely be looking for these. But I'm sure the prices will be out of sight once they are all purchased.

flashed · 05-09-2016, 12:39 PM

I really like that Gulf one ,where are these sold at and what price range ?

Hook'em · 05-09-2016, 06:03 PM

At $115 a piece, I'll just be admiring them on the internet.

ACME Diecast C-10s

flashed · 05-09-2016, 06:58 PM

I will just be watching as well .

**Already Gone** · 05-09-2016, 07:04 PM

The good stuff is always pricey !!

**special-K** · 05-10-2016, 10:01 PM

Now that I see the real thing, the front looks awful funny. The bumper face is vertical, The grille and headlight trim look too square and proportions are off. The front of the hood starts like a 67/68 but swoops up to end up steep like 69-72. The grille surround is really wide and it looks like the drip rail was shaved. In these bigger scale replicas they have to get it right. Doesn't bother me on a 1/64 as much when things are off. It doesn't bother me as much when it's a whole lot less money, too. The Hiway 61 stuff was never this much. That's Danbury Mint prices for Hot Wheels quality. These will get bought up and sold on Ebay for even more

**Already Gone** · 05-11-2016, 07:22 AM

Quote:

Originally Posted by special-K

Now that I see the real thing, the front looks awful funny. The bumper face is vertical, The grille and headlight trim look too square and proportions are off. The front of the hood starts like a 67/68 but swoops up to end up steep like 69-72. The grille surround is really wide and it looks like the drip rail was shaved. In these bigger scale replicas they have to get it right. Doesn't bother me on a 1/64 as much when things are off. It doesn't bother me as much when it's a whole lot less money, too. The Hiway 61 stuff was never this much. That's Danbury Mint prices for Hot Wheels quality. These will get bought up and sold on Ebay for even more

If you going from the posted pics on here I see your point. However if that is the way they are going to look when finished I agree they will die with them. I have several HiWay 61 67-72's and they do not look like the pictures.

**special-K** · 05-11-2016, 09:14 AM

I was going by the pictures of the actual product shown in the link Hook'em provided. I hate to be such a grump on these, but I will spend crazy money for the right stuff. If a company wants my $100+ for their Chinese made replica I want it to look like the real thing is scale. These are obviously not toys, they are made for adults to collect. All they need are 750 people who don't notice details, so they'll get their money from them, not me. I say all this because I wanted one. I would have paid the price and was ready to pre-order. I do appreciate you sharing this. Just disappointed in the level of quality

05-06-2016, 02:24 AM	#1
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,143	GMP/ACME C10 Diecast Apparently these two are being released this summer. They are based on the old Highway61 C10 tooling. There are 1:18th and will be on the high side of pricing. Attached Images __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

05-06-2016, 08:32 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: GMP/ACME C10 Diecast Thanks! I'll have to look for those. I like the 750 pieces part. If I only get one I like the green one. Not a fan of a pickup painted up as a race car when such a truck never ran such a race. But I guess it could be a support vehicle for the team or a shop truck. It's not like it has a number painted on it. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 05-07-2016 at 11:00 AM.

05-09-2016, 12:24 PM	#3
silvereagle07 Registered User Join Date: Sep 2008 Location: Bailey, NC Posts: 2,462	Re: GMP/ACME C10 Diecast Nice! I will definitely be looking for these. But I'm sure the prices will be out of sight once they are all purchased. __________________ Jeramy '84 GMC project truck '85 Chevy 4X4 SOLD '07 Chevy Trailblazer SS 5th Annual SHPHC Car/Truck Show Pics http://67-72chevytrucks.com/vboard/s...d.php?t=543605 UPDATED PICS! CHECK 'EM OUT

05-09-2016, 12:39 PM	#4
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: GMP/ACME C10 Diecast I really like that Gulf one ,where are these sold at and what price range ?

05-09-2016, 06:03 PM	#5
Hook'em Senior Member Join Date: Jul 2004 Location: Round Rock, Texas Posts: 858	Re: GMP/ACME C10 Diecast At $115 a piece, I'll just be admiring them on the internet. ACME Diecast C-10s __________________ Hook'em

05-09-2016, 06:58 PM	#6
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: GMP/ACME C10 Diecast I will just be watching as well .

05-09-2016, 07:04 PM	#7
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,143	Re: GMP/ACME C10 Diecast The good stuff is always pricey !! __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

05-10-2016, 10:01 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: GMP/ACME C10 Diecast Now that I see the real thing, the front looks awful funny. The bumper face is vertical, The grille and headlight trim look too square and proportions are off. The front of the hood starts like a 67/68 but swoops up to end up steep like 69-72. The grille surround is really wide and it looks like the drip rail was shaved. In these bigger scale replicas they have to get it right. Doesn't bother me on a 1/64 as much when things are off. It doesn't bother me as much when it's a whole lot less money, too. The Hiway 61 stuff was never this much. That's Danbury Mint prices for Hot Wheels quality. These will get bought up and sold on Ebay for even more __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-11-2016, 09:14 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: GMP/ACME C10 Diecast I was going by the pictures of the actual product shown in the link Hook'em provided. I hate to be such a grump on these, but I will spend crazy money for the right stuff. If a company wants my $100+ for their Chinese made replica I want it to look like the real thing is scale. These are obviously not toys, they are made for adults to collect. All they need are 750 people who don't notice details, so they'll get their money from them, not me. I say all this because I wanted one. I would have paid the price and was ready to pre-order. I do appreciate you sharing this. Just disappointed in the level of quality __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.