MO This 72 C10 just signed it's organ donor card....

[wahl4m]

Is the floor around the gas pedal -any good for a patch ?? Thanks mike {shipped to zip 50211-probably go in a postal box ?}

[specialtyretail]

Originally Posted by FIREBALL

Hey Fred, I'm in search for the two L shaped brackets on the front bumper, one on each inside holding the top portion of the bumper. Im also after any rear tailgate molding trim clips, ones Im after are on each side of the tailgate handle the long strips of trim, I had a few break on me. Thanks Kurt

SOLD,,,, THANKS.... I just took these off. I think they are what you are talking about. How does $15.00 shipped. sound. Thanks, Fred.

[1972larry]

Fred I need one chrome / black wiper knob and both chrome bezels for headlight switch and wiper switch

[FIREBALL]

Fred I'm away till Thursday morn let me check something when I get back Hm and I'll get back with you then if that's ok

[bowhunter5846]

What kind of shape would the steering column be in? Bearings good? How much to send to 68801? Thank You!

[specialtyretail]

Originally Posted by bowhunter5846

What kind of shape would the steering column be in? Bearings good? How much to send to 68801? Thank You!

Let me get it pulled and get you some pics. Thanks, Fred.

[BenC/10]

How's it goin Fred, looking to convert my gas pedal assembly from the rod version to the cable version, I'm assuming this truck has the cable version? if so would it be a "bolt on" installation if i got the whole pedal assembly from you? Thanks, Ben

[specialtyretail]

Originally Posted by BenC/10

How's it goin Fred, looking to convert my gas pedal assembly from the rod version to the cable version, I'm assuming this truck has the cable version? if so would it be a "bolt on" installation if i got the whole pedal assembly from you? Thanks, Ben

Hey Ben, not sure about it being a bolt in deal or not. I do not think I have the cable, just the pedal assembly. Thanks, Fred.

[Gus350]

What does the tailgate look like and the cowl. Thanks Kevin

[crud]

I'm interested in the parking brake levers/arms that connect to the cable at the rear behind the brake drums, if you have them.
Thanks.

[BenC/10]

Originally Posted by specialtyretail

Hey Ben, not sure about it being a bolt in deal or not. I do not think I have the cable, just the pedal assembly. Thanks, Fred.

Lol I actually searched the forum and found that it can be modded to fit into mine. I would be interested in picking up the pedal assembly if that's all you have. Maybe you can snap me a couple of pics of it too if you have some time.

[specialtyretail]

Originally Posted by Gus350

What does the tailgate look like and the cowl. Thanks Kevin

Kevin, tailgate and cowl are both sold. Thanks, Fred.

[chainsawman]

Thanks Fred.Stuff came today.

[Gus350]

Thanks if you get another gold one let me know need one for a future build thanks

[71CHEVYSHORTBED402]

Here's a small list. PM if you like: The steel has to be right please (ie show quality, no dents), OEM and correct:

1. Pair of OEM outer grille brackets. If you just have a LH side I'll take it. Really, I only need the LH side, but if you don't want to split up no big. I don't need the hardware, but if necessary I'll take that too.

2. Spring from under the bench seat that holds the rod for the seat adjustment.

3. Hardware for the ground strap from bed to frame. I don't know what it's supposed to be because mine was missing.

4. Four 1/2" head tapered screws with integrated washers for mounting the cowl panel.

5. Anti-Dieseling Relay hardware. I have no idea what the hardware is supposed to be, because mine was missing.

6. Five 5/16" head tapered screws to attach the wire gutter to radiator support. I'm not sure if there's supposed to be five or six.

7. Four phillips head tapered screws with integrated washers for the glove box perimeter (i.e., glove box liner screws). Nice finish preferred. I'll take them all if nice or need be.

If you or anyone else has A/C parts

8. Blower Vent Tube for A/C. If by chance it's super then I'll take it.

9. I'm also interested in the small parts (retainers, screws, nuts, clips etc.) for an A/C system, from the evaporator box forward. Some of those retainers are nylon. Would prefer the nylon is nice, but it doesn't have to be.

10. Center A/C vent housing (aka assembly), good condition and good teeth. I could use a nut or two for attaching the vent to it as well. These have a washer molded into the head.

11. One or two screws to mount the Vacuum Reservoir to the evaporator Box. These have a washer molded into the head. I don't recall head size, 3/8" I imagine.

12. Spring that connects the air door to the outer cowl. It's approx. 4.25".


Note: I've requested these parts from another source, but he's semi-retired. If he comes up with these parts as well no problem. Nothing wrong having more than I need. At this point it's less than

[OLEBEATER]

Received the inner fender brace yesterday. Looks good. Thanks........Roland

[Dustmaker65]

Interested in Power Brake Ass. Will need everything from pedal to porportioning valve, minus Master Cylinder. Shipped to 61554

Thanks! Jimmy

[FIREBALL]

Originally Posted by specialtyretail

I just took these off. I think they are what you are talking about. How does $15.00 shipped. sound. Thanks, Fred.

Fred, just sent u PayPal for the front bumper brackets thanks again....Kurt

[wahl4m]

checking on the floor parch around the gas pedal ?any good ? thanks fred

[specialtyretail]

Originally Posted by 71CHEVYSHORTBED402

Here's a small list. PM if you like: The steel has to be right please (ie show quality, no dents), OEM and correct:

1. Pair of OEM outer grille brackets. If you just have a LH side I'll take it. Really, I only need the LH side, but if you don't want to split up no big. I don't need the hardware, but if necessary I'll take that too.

2. Spring from under the bench seat that holds the rod for the seat adjustment.

3. Hardware for the ground strap from bed to frame. I don't know what it's supposed to be because mine was missing.

4. Four 1/2" head tapered screws with integrated washers for mounting the cowl panel.

5. Anti-Dieseling Relay hardware. I have no idea what the hardware is supposed to be, because mine was missing.

6. Five 5/16" head tapered screws to attach the wire gutter to radiator support. I'm not sure if there's supposed to be five or six.

7. Four phillips head tapered screws with integrated washers for the glove box perimeter (i.e., glove box liner screws). Nice finish preferred. I'll take them all if nice or need be.

If you or anyone else has A/C parts

8. Blower Vent Tube for A/C. If by chance it's super then I'll take it.

9. I'm also interested in the small parts (retainers, screws, nuts, clips etc.) for an A/C system, from the evaporator box forward. Some of those retainers are nylon. Would prefer the nylon is nice, but it doesn't have to be.

10. Center A/C vent housing (aka assembly), good condition and good teeth. I could use a nut or two for attaching the vent to it as well. These have a washer molded into the head.

11. One or two screws to mount the Vacuum Reservoir to the evaporator Box. These have a washer molded into the head. I don't recall head size, 3/8" I imagine.

12. Spring that connects the air door to the outer cowl. It's approx. 4.25".


Note: I've requested these parts from another source, but he's semi-retired. If he comes up with these parts as well no problem. Nothing wrong having more than I need. At this point it's less than

I do have a pair of outer grill brackets. $42.00 shipped for the pair. I will try to get pics tonight. Thanks, Fred.

[specialtyretail]

Originally Posted by Dustmaker65

Interested in Power Brake Ass. Will need everything from pedal to porportioning valve, minus Master Cylinder. Shipped to 61554

Thanks! Jimmy

The truck has sold. All I have is the booster, Thanks, Fred.

[71CHEVYSHORTBED402]

Originally Posted by specialtyretail

I do have a pair of outer grill brackets. $42.00 shipped for the pair. I will try to get pics tonight. Thanks, Fred.

Awesome, thank you.

[72 Super]

Hey Fred, I recieved my parts yesterday, they look good. Do you have the front bumper bolts, if so what kind of shape are they in ?

Thank you,
Ray

[BenC/10]

Any news on the gas pedal setup? browsing the parts board and havent seen anyothers

[specialtyretail]

Originally Posted by 71CHEVYSHORTBED402

Awesome, thank you.

Pics of brackets...