68 1 ton and parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chucks70 · 04-02-2002, 11:14 PM

Went and looked at it today. Front clip is off except for rad. support. Has new inner fenders and nice outer fenders (no rust) that are sittin in the cab. Cab is off a 70 4x4, has air, no compressor though. New rockers, supports and corners. Engine fresh build from a local shop, straight 6 292? Springs look like they could hold a house. Flatbed comes with it, made from 1/4" diamond plate with square tubing for frame and supports. Comes with 2 extra rearends, 2 68 hood, one is junk, 2 70 hoods, 2 doors, at least one is junk, couldn't see the other real good, 2 extra rearends, extra windshield. Chasis is done, front clip needs put on and front brake lines need hooked up. Guy wants $1600 and he'll deliver. What do you all think? Sorry, no pictures.

teeitup · 04-03-2002, 08:06 AM

Sounds pretty good to me but I don't know what all you would have to do to get it tagged. In Kansas they check the frame and vin plate to check serial #'s. You might have to get a builders title. Good luck.

stelth2002 · 04-03-2002, 12:15 PM

I would buy a rear end from you if it was a 3.07 ratio. Sounds like a pretty good deal though.

------------------
67 Chevrolet LWB with rebuilt 292. 415 ft. lbs of torque, 4 speed, 3.73 Posi, straight and almost painted.

04-02-2002, 11:14 PM	#1
chucks70 Registered User Join Date: Feb 2002 Location: Cadiz, OH Posts: 628	68 1 ton and parts Went and looked at it today. Front clip is off except for rad. support. Has new inner fenders and nice outer fenders (no rust) that are sittin in the cab. Cab is off a 70 4x4, has air, no compressor though. New rockers, supports and corners. Engine fresh build from a local shop, straight 6 292? Springs look like they could hold a house. Flatbed comes with it, made from 1/4" diamond plate with square tubing for frame and supports. Comes with 2 extra rearends, 2 68 hood, one is junk, 2 70 hoods, 2 doors, at least one is junk, couldn't see the other real good, 2 extra rearends, extra windshield. Chasis is done, front clip needs put on and front brake lines need hooked up. Guy wants $1600 and he'll deliver. What do you all think? Sorry, no pictures. __________________ 68 1 ton dually 292, 2001 Sebring, 2004 Trailblazer, 11 Camaro Convertible.

04-03-2002, 08:06 AM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Sounds pretty good to me but I don't know what all you would have to do to get it tagged. In Kansas they check the frame and vin plate to check serial #'s. You might have to get a builders title. Good luck. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-03-2002, 12:15 PM	#3
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	I would buy a rear end from you if it was a 3.07 ratio. Sounds like a pretty good deal though. ------------------ 67 Chevrolet LWB with rebuilt 292. 415 ft. lbs of torque, 4 speed, 3.73 Posi, straight and almost painted. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.