NE CPP Modular Drop Spindles W/ Wilwood Calipers, etc... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironangel** · 05-10-2016, 01:54 PM

I've been saving these for another project but money's getting short so here's the details. These are new, never installed and in the boxes. CPP part#7387SWBK-5D W/Wilwood Calipers. < "Our exclusive new design gives you 1-1/8" more clearance at the fender and helps solves tire to fender interference commonly found with lowered trucks. Spindle and brackets works with factory 1971-87 C10 brake components. The ALL NEW CPP Modular Spindle offers many benefits available for the first time, installs easy without modifications, works with factory ball joints and tie rod ends, lowers your truck a full 2-1/2". Kit shown with 6-bolt pattern."> Heres their price before the Wilwood calipers, 7387SWBK-5 1973-87, (5x5), 5 lug, 2" drop (options) Photo/Info http://www.classicperform.com/Store/...6062SWBK-5.htm

$799.00...Thats what I'm letting these go for, $799.00 plus shipping.
I also have a new set of CPP 2" drop springs, cost me $95, yours for $80 + shipping.
I also have lots of miscellaneous factory (used) parts for the 350ci motor.
Set of excellent condition rams horns, $200
Plug wire loom supports with heat shields, heat riser with tube and air breather assembly, all excellent condition. (other than a bit dirty) $60 + shipping...I'll post more stuff and pics tonight, I have a steering box, power steering pump with brackets, vapor canisters,...Thanks, ~Michael~

**72peace** · 05-10-2016, 05:02 PM

The drop springs, are they for front or rear? Also, does the brake kit include the s/s hoses? I'm only about an hour away so I could pick up.

Cheers,

**Ironangel** · 05-10-2016, 08:32 PM

Quote:

Originally Posted by 72peace

The drop springs, are they for front or rear? Also, does the brake kit include the s/s hoses? I'm only about an hour away so I could pick up.

Cheers,

Yes, the kit does have a pair of Stainless Steel braided lines, copper crush washers, banjo bolts, clips, and fittings...The drop springs are indeed for the front of the truck. Bring a trailer and I'll send you home with a 72 cab filled with whatever you think you need or want. I have a set of rally wheels with center caps and rings, rocker panels, etc...The city cited me so I need to get rid of alot of C-10 goodies I've gathered over the years. You name it and I probably have one stashed out there in the shop. Crate motors to 12-bolts, chrome bumpers to egg crate grill inserts...The rotors are 12" which is a good thing if your running 15" wheels...~Ghostrider Industries~ 402-245-5327

heres a pic of the springs, next to a 72 COPO SS-C/10 hood,

The stainless line kit, second pic

**70STOVEBOLT** · 05-10-2016, 10:09 PM

Got any 68-71 blue armrests and door escutcheons in nice condition?

**Ironangel** · 05-11-2016, 12:03 AM

71STOVEBOLT, Sorry I dont have any pre-72 arm rests or escutcheons.

**70STOVEBOLT** · 05-11-2016, 11:56 AM

Ok, thank you for the reply. GLWS

**Ironangel** · 05-19-2016, 12:35 AM

Still available,

**Ironangel** · 05-19-2016, 04:12 PM

Quote:

Originally Posted by 72peace

The drop springs, are they for front or rear? Also, does the brake kit include the s/s hoses? I'm only about an hour away so I could pick up.

Cheers,

If you come pick these spindles up I'll throw in the springs for free. $800 for the total package worth over $1100.00. New lowered price for all is $900 shipped in lower 48...

**FIREBALL** · 05-19-2016, 05:35 PM

Man, I wish they were red instead of black....

**72peace** · 05-20-2016, 04:02 PM

Quote:

Originally Posted by Ironangel

If you come pick these spindles up I'll throw in the springs for free. $800 for the total package worth over $1100.00. New lowered price for all is $900 shipped in lower 48...

Sorry, found a powdercoated frame local I couldn't pass up, $1200. So back to saving up for spindles. Restoring $200 at a time.

Cheers,
Nathan

**Ironangel** · 05-20-2016, 07:11 PM

Quote:

Originally Posted by 72peace

Sorry, found a powdercoated frame local I couldn't pass up, $1200. So back to saving up for spindles. Restoring $200 at a time.

Cheers,
Nathan

All good Nathan, springs and spindles sold to Montez

chmurt · 05-21-2016, 12:56 PM

Michael, the Power Steering Box, Power Steering Pump, and Bracket you mentioned - Are they for the 350 ci V8? 1/2 ton? What year model? Pitman Arm? Intermediate Steering Column parts, etc. available? I'm wanting to convert a '71 GMC w/350 V8 from Manual to Power Steering.

Thanks, Chuck

05-10-2016, 01:54 PM	#1
Ironangel Senior Member Join Date: Feb 2010 Location: Falls City, Nebraska "100 Miles From Nowhere" Posts: 2,219	CPP Modular Drop Spindles W/ Wilwood Calipers, etc... I've been saving these for another project but money's getting short so here's the details. These are new, never installed and in the boxes. CPP part#7387SWBK-5D W/Wilwood Calipers. < "Our exclusive new design gives you 1-1/8" more clearance at the fender and helps solves tire to fender interference commonly found with lowered trucks. Spindle and brackets works with factory 1971-87 C10 brake components. The ALL NEW CPP Modular Spindle offers many benefits available for the first time, installs easy without modifications, works with factory ball joints and tie rod ends, lowers your truck a full 2-1/2". Kit shown with 6-bolt pattern."> Heres their price before the Wilwood calipers, 7387SWBK-5 1973-87, (5x5), 5 lug, 2" drop (options) Photo/Info http://www.classicperform.com/Store/...6062SWBK-5.htm $799.00...Thats what I'm letting these go for, $799.00 plus shipping. I also have a new set of CPP 2" drop springs, cost me $95, yours for $80 + shipping. I also have lots of miscellaneous factory (used) parts for the 350ci motor. Set of excellent condition rams horns, $200 Plug wire loom supports with heat shields, heat riser with tube and air breather assembly, all excellent condition. (other than a bit dirty) $60 + shipping...I'll post more stuff and pics tonight, I have a steering box, power steering pump with brackets, vapor canisters,...Thanks, ~Michael~ __________________ Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American"

05-10-2016, 05:02 PM	#2
72peace Senior Member Join Date: Jan 2011 Location: Bellevue, NE Posts: 712	Re: CPP Modular Drop Spindles W/ Wilwood Calipers, etc... The drop springs, are they for front or rear? Also, does the brake kit include the s/s hoses? I'm only about an hour away so I could pick up. Cheers,

05-10-2016, 10:09 PM	#4
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: CPP Modular Drop Spindles W/ Wilwood Calipers, etc... Got any 68-71 blue armrests and door escutcheons in nice condition? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

05-11-2016, 12:03 AM	#5
Ironangel Senior Member Join Date: Feb 2010 Location: Falls City, Nebraska "100 Miles From Nowhere" Posts: 2,219	Re: CPP Modular Drop Spindles W/ Wilwood Calipers, etc... 71STOVEBOLT, Sorry I dont have any pre-72 arm rests or escutcheons. __________________ Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American"

05-11-2016, 11:56 AM	#6
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: CPP Modular Drop Spindles W/ Wilwood Calipers, etc... Ok, thank you for the reply. GLWS __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

05-19-2016, 12:35 AM	#7
Ironangel Senior Member Join Date: Feb 2010 Location: Falls City, Nebraska "100 Miles From Nowhere" Posts: 2,219	Re: CPP Modular Drop Spindles W/ Wilwood Calipers, etc... Still available, __________________ Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American" Last edited by Ironangel; 05-19-2016 at 04:03 PM.

05-19-2016, 05:35 PM	#9
FIREBALL (007) aka Houdini Join Date: Mar 2010 Location: ROCKMART/ROME GA Posts: 354	Re: CPP Modular Drop Spindles W/ Wilwood Calipers, etc... Man, I wish they were red instead of black.... __________________ Live life one day at a time!

05-21-2016, 12:56 PM	#12
chmurt Registered User Join Date: Jul 2012 Location: Chula Vista, CA Posts: 51	Re: CPP Modular Drop Spindles W/ Wilwood Calipers, etc... Michael, the Power Steering Box, Power Steering Pump, and Bracket you mentioned - Are they for the 350 ci V8? 1/2 ton? What year model? Pitman Arm? Intermediate Steering Column parts, etc. available? I'm wanting to convert a '71 GMC w/350 V8 from Manual to Power Steering. Thanks, Chuck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.