Help with a static drop please

[Brandons63]

Originally Posted by PGSigns

With the drop spindles you will need a 2" drop spring to get you about where you are now with the ride height. On the rear I second the super track bar. You did not mention shock relocators on the rear. If you have not done those they are a big help in getting the shock angles corrected. O just cut my bumps stops off front and rear leaving about a 1/2" of rubber.
Jimmy

Ok. I was under the impression I didn't need relocation brackets with the shorter shocks. I thought they just moved the mounting location up to utilize factory length. And on the track bar, when I read the description for the super track bar, it makes it sound like they are only required for drops more than 5" so other than cutting down the bump stops, is there anything else you do in the front? Geometry wise?