MI Gauging Interest in new tach harnesses - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**TBONE1964** · 11-21-2014, 11:53 AM

Bump for the weekend.

have a good weekend all,

Take care,
Tom

Blazerback72 · 11-21-2014, 11:58 AM

I will take one for an HEI thanks! Just pm me for address info and payment info when you get a chance thanks .

**TBONE1964** · 11-21-2014, 12:01 PM

PM on the way.

Thank you very much,
Tom

Blazerback72 · 11-21-2014, 12:27 PM

Ill be sending payment via money order out to you tomorrow in the amount of 25.00 thanks

**TBONE1964** · 11-21-2014, 12:32 PM

Quote:

Originally Posted by Blazerback72

Ill be sending payment via money order out to you tomorrow in the amount of 25.00 thanks

Great,

Thank you very much for your business. I did get your PM also.

Take care,
Tom

**davischevy** · 12-09-2014, 10:57 PM

I need a point style harness.

Thanks,
Larry

**TBONE1964** · 12-09-2014, 11:00 PM

Quote:

Originally Posted by davischevy

I need a point style harness.

Thanks,
Larry

Hi Larry, I have one available and can ship tomorrow. I will send PM with payment options.

Thank you very much,
Tom

snipescastle2 · 12-10-2014, 09:18 AM

Just a side note, are we required to run a "Filter" with the factory tachs while using an "HEI" distributer? just wanted to be sure before I "FRY" my tachometer!!!
Ben

**TBONE1964** · 12-10-2014, 12:05 PM

Quote:

Originally Posted by snipescastle2

Just a side note, are we required to run a "Filter" with the factory tachs while using an "HEI" distributer? just wanted to be sure before I "FRY" my tachometer!!!
Ben

Ben

You will fry your take without a filter. The filter was introduced on GM cars with tachometers in the late 70's to improve tachometer performance by filtering out ignition system "noise". I have no evidence to prove or deny the claim but people that use filters say they think there tachometer is more responsive.

Hope this helps.

Tom

snipescastle2 · 12-10-2014, 12:09 PM

Tom,
Thanks for the clarification, what do I use for a filter? a capacitor?
Thanks again!
Ben

**TBONE1964** · 12-10-2014, 03:53 PM

Quote:

Originally Posted by snipescastle2

Tom,
Thanks for the clarification, what do I use for a filter? a capacitor?
Thanks again!
Ben

http://www.summitracing.com/search/p...signal-filters

You may find other sources but the ones they sell at Summit will work OK for you. I am not 100% sure if a capacitor would work with an HEI ignition system. They were designed for radio noise with point style ignitions.

Hope this helps
Tom

**TBONE1964** · 01-10-2015, 01:12 AM

weekend bump.

I have inventory to build HEI and point style harnesses.

Thank you,
Tom

budnikguy · 05-25-2016, 01:33 PM

Pm'd ya....

**TBONE1964** · 05-25-2016, 08:08 PM

Quote:

Originally Posted by budnikguy

Pm'd ya....

Pm coming back.

Take care,
Tom

jaybatta · 05-25-2016, 08:51 PM

Hey Tom, I will take one with an HEI harness. Could you send me your PayPal address please

Thank you,

Joe

**TBONE1964** · 05-25-2016, 09:03 PM

Quote:

Originally Posted by jaybatta

Hey Tom, I will take one with an HEI harness. Could you send me your PayPal address please

Thank you,

Joe

Hi Joe,

PM on the way.

Thank you,
Tom

11-21-2014, 11:53 AM	#76
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Gauging Interest in new tach harnesses Bump for the weekend. have a good weekend all, Take care, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

11-21-2014, 11:58 AM	#77
Blazerback72 Registered User Join Date: Nov 2014 Location: Benbrook TX Posts: 38	Re: Gauging Interest in new tach harnesses I will take one for an HEI thanks! Just pm me for address info and payment info when you get a chance thanks . __________________ 72 Chevy cheyenne super short wide 350 69 SS Camaro 502 72 2wd Chevy Blazer (project) EVERY DAY IS A GOOD DAY IF YOUR ABOVE GROUND!!

11-21-2014, 12:01 PM	#78
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Gauging Interest in new tach harnesses PM on the way. Thank you very much, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

11-21-2014, 12:27 PM	#79
Blazerback72 Registered User Join Date: Nov 2014 Location: Benbrook TX Posts: 38	Re: Gauging Interest in new tach harnesses Ill be sending payment via money order out to you tomorrow in the amount of 25.00 thanks __________________ 72 Chevy cheyenne super short wide 350 69 SS Camaro 502 72 2wd Chevy Blazer (project) EVERY DAY IS A GOOD DAY IF YOUR ABOVE GROUND!!

12-09-2014, 10:57 PM	#81
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,814	Re: Gauging Interest in new tach harnesses I need a point style harness. Thanks, Larry __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

12-10-2014, 09:18 AM	#83
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: Gauging Interest in new tach harnesses Just a side note, are we required to run a "Filter" with the factory tachs while using an "HEI" distributer? just wanted to be sure before I "FRY" my tachometer!!! Ben

12-10-2014, 12:09 PM	#85
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: Gauging Interest in new tach harnesses Tom, Thanks for the clarification, what do I use for a filter? a capacitor? Thanks again! Ben

01-10-2015, 01:12 AM	#87
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Gauging Interest in new tach harnesses weekend bump. I have inventory to build HEI and point style harnesses. Thank you, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

05-25-2016, 01:33 PM	#88
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Gauging Interest in new tach harnesses Pm'd ya....

05-25-2016, 08:51 PM	#90
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 837	Re: Gauging Interest in new tach harnesses Hey Tom, I will take one with an HEI harness. Could you send me your PayPal address please Thank you, Joe __________________ Joe 1968 K20 1970 K20 Semper Fi



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.