Those of you who are 2WD lowered on 8" Rally's...wheel spacers?

[Nick_R_23]

Originally Posted by Kaysen

I just did this very thing on my 86 short wide bed. Get 1" spacers and you'll be all set. My setup is 255/60 on 7" rally's up front. 275/60 on 8s in the rear with 1" spacers.

I like this setup. How much room do you have from the tire to the fender?

Originally Posted by school boy

I have a flip kit and 2 inch drop shackles, running 15x8 rallies and 295/50/15's. No rub but thought about 1" spacers just to bring the tire out.

Is this a stepside? Do you have pictures of your inner fender clearance?

Originally Posted by SCOTI

Are you inquiring about factory 8" truck 'Ralley' wheels?

Yes, just stock 73-87 Truck/Suburban 5 lug rally wheels.

[Kaysen]

I got my spacers on eBay for around 40 bucks shipped. Be sure that the center bore is 82mm or bigger. The hub centric jeep spacers will NOT fit as the center bore is too small. 1" spacers do not require you to cut the factory lug studs down, just bolt them on and bolt the wheel to the spacer.

I have 1/4"-3/8" clearance from the factory non rolled fenderwell lip to the outermost bubble of sidewall bulge.

Hope this helps.

[Kaysen]

Here's the exact ones I got. On sale now for ten dollars less than what I paid.

[Jake Wade]

Thank you so much for the info. Looks like they may be out of stock since I cannot find that particular one. They do list a 1.5.

[school boy]

Originally Posted by Nick_R_23

Is this a stepside? Do you have pictures of your inner fender clearance?

.

If I remember correctly, about 3/4 to 1" of clearance

[Nick_R_23]

Originally Posted by school boy

If I remember correctly, about 3/4 to 1" of clearance

Wow, even with 295's and no spacers? Mine seemed pretty tight even with my stockish tires.

[Kaysen]

Side pic for blazer2007