AZ Lowering blocks and new U-bolts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mahanian · 07-07-2015, 02:37 PM

I was going to go with 6" drop springs and 1/2" lowering blocks but decided not to use the 1/2" lowering blocks. Blocks are aluminum and U-bolts have been painted steel gray to prevent them from rusting. $50 shipped

mahanian · 07-15-2015, 10:58 PM

ttt

**BIG ORANGE** · 08-09-2015, 10:44 AM

How long are those Ubolts pass through on the bottom of trailing arm,
otherwords, how much sticks below the trailing arm with the block in place.
I hope I ask that correctly.
Donnie

mahanian · 08-10-2015, 03:42 PM

The U-bolts are 8.5" from where they would contact the axle tube to the end of the threaded portion

**BIG ORANGE** · 08-15-2015, 08:11 AM

Dang, sorry I didnt get back to ya, I'm gonna pass....
Need longer U bolts.....

mahanian · 08-15-2015, 11:01 AM

No problem, these u bolts are the right length for half inch blocks with factory trailing arms

mahanian · 08-27-2015, 10:19 AM

ttt

mahanian · 11-16-2015, 05:27 PM

ttt

**Elliot949** · 11-16-2015, 08:03 PM

Quote:

Originally Posted by BIG ORANGE

Dang, sorry I didnt get back to ya, I'm gonna pass....
Need longer U bolts.....

How long do you need...

mahanian · 12-17-2015, 08:40 PM

ttt

mahanian · 02-23-2016, 06:16 PM

ttt

mahanian · 05-26-2016, 05:01 PM

ttt

frank69 · 05-27-2016, 01:36 AM

I'll take these po me address so I cam send money order

mahanian · 06-02-2016, 03:31 PM

I got the money order, I'll get the parts boxed up and shipped out asap

**GR8-68** · 06-02-2016, 04:03 PM

Darn it !! How did I miss these ? Is this a kit you can buy somewhere or did you make these ? I want to drop the back another 1/2" but Ihave already purchased my lowering springs

07-07-2015, 02:37 PM	#1
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Lowering blocks and new U-bolts I was going to go with 6" drop springs and 1/2" lowering blocks but decided not to use the 1/2" lowering blocks. Blocks are aluminum and U-bolts have been painted steel gray to prevent them from rusting. $50 shipped Attached Images __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS Last edited by mahanian; 07-18-2015 at 09:02 PM.

07-15-2015, 10:58 PM	#2
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Lowering blocks and new U-bolts ttt __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

08-09-2015, 10:44 AM	#3
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,764	Re: Lowering blocks and new U-bolts How long are those Ubolts pass through on the bottom of trailing arm, otherwords, how much sticks below the trailing arm with the block in place. I hope I ask that correctly. Donnie __________________ Things happen for a reason!

08-10-2015, 03:42 PM	#4
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Lowering blocks and new U-bolts The U-bolts are 8.5" from where they would contact the axle tube to the end of the threaded portion __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

08-15-2015, 08:11 AM	#5
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,764	Re: Lowering blocks and new U-bolts Dang, sorry I didnt get back to ya, I'm gonna pass.... Need longer U bolts..... __________________ Things happen for a reason!

08-15-2015, 11:01 AM	#6
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Lowering blocks and new U-bolts No problem, these u bolts are the right length for half inch blocks with factory trailing arms __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

08-27-2015, 10:19 AM	#7
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Lowering blocks and new U-bolts ttt __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

11-16-2015, 05:27 PM	#8
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Lowering blocks and new U-bolts ttt __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

12-17-2015, 08:40 PM	#10
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Lowering blocks and new U-bolts ttt __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

02-23-2016, 06:16 PM	#11
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Lowering blocks and new U-bolts ttt __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

05-26-2016, 05:01 PM	#12
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Lowering blocks and new U-bolts ttt __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

05-27-2016, 01:36 AM	#13
frank69 Registered User Join Date: Feb 2007 Location: Laughlin,Nv Posts: 141	Re: Lowering blocks and new U-bolts I'll take these po me address so I cam send money order

06-02-2016, 03:31 PM	#14
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Lowering blocks and new U-bolts I got the money order, I'll get the parts boxed up and shipped out asap __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

06-02-2016, 04:03 PM	#15
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: Lowering blocks and new U-bolts Darn it !! How did I miss these ? Is this a kit you can buy somewhere or did you make these ? I want to drop the back another 1/2" but Ihave already purchased my lowering springs



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.