1966 C10 Roof - Front Part above Windshield

[Afirehawk1]

I think i found this repro at LMC or NPD parts.
But catalogs say 60-63.
Anyone make this part?
I removed roof skin. Its clean on both sides but obviously has a few pin holes

[jonzcustomshop]

I used one off a 66 on my 61, not sure why the repro says 60-63, because as far as I can tell that piece is the same 60-66, the one I did fit with no issues.


my "how to" starts on page # 9 post # 202:
http://67-72chevytrucks.com/vboard/s...=646830&page=9

[5Tractorguy]

I bought one for my '64 cab. It might say 60-63 but it is the same exact piece as 64-66. Fit right up nice.

[Chknlyps2]

Originally Posted by Afirehawk1

I think i found this repro at LMC or NPD parts.
But catalogs say 60-63.
Anyone make this part?
I removed roof skin. Its clean on both sides but obviously has a few pin holes

Here are pics of a 63 & 64 GMC that are side by side, red one is the 63. I looked at each one back and forth and could not tell the difference. It looks like the A pillars, and from the top curve of the windshield & down are where the changes in the cabs are.

That panel on yours looks like it was shot with a shotgun, some of the pin holes look indented.