CPP Disc brake caliper question.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

IHutch5R · 06-04-2016, 12:25 PM

I've got my disc brake conversion all on the truck but in the box the calipers were in were these washers and I can't figure out where the darn things are supposed to go. There are two for each side and there are two mounting bolts that they fit on, i just cant figure out where they are supposed to sit. If anyone has done this kit before and can tell me or just knows, it would be much appreciated. I want to drive this thing already.

**The Rocknrod** · 06-04-2016, 02:03 PM

Those are copper crush washers for the brake line, where it attaches to the caliper.

IHutch5R · 06-04-2016, 02:26 PM

Quote:

Originally Posted by The Rocknrod

Those are copper crush washers for the brake line, where it attaches to the caliper.

Sorry.. I meant to add that. I have the washers for the brake line though. So I'm not sure what these are for.

Mjminino · 06-04-2016, 10:36 PM

Are you sure the ones for the brake line were copper crush ones? If so, then maybe they were extra.

**The Rocknrod** · 06-04-2016, 10:39 PM

Ya if they're copper they don't go on the suspension or chassis.

O'larry · 06-04-2016, 11:18 PM

My CCP kit came with 2 extra crush washers

scoot_mcgrute · 06-06-2016, 09:39 AM

Quote:

Originally Posted by O'larry

My CCP kit came with 2 extra crush washers

Same here.

dracko · 06-06-2016, 08:08 PM

What is your plan for brake lines? I have the rubber hoses about 12" long but not really sure how or where to mount them to the new crossmember ('81).

IHutch5R · 06-09-2016, 09:58 PM

Quote:

Originally Posted by dracko

What is your plan for brake lines? I have the rubber hoses about 12" long but not really sure how or where to mount them to the new crossmember ('81).

I put new pre bent lines on it a while back and just used the rubber lines that came with the kit that go from the hard line to the caliper.

dracko · 06-10-2016, 10:42 AM

Oh okay thanks. You still running the original crossmember? I'd buy prebent lines too but I prob won't have the prop valve in the stock location. Did you need to weld mounting tabs on the crossmember where the hardline/rubber line meet?

IHutch5R · 06-10-2016, 10:50 AM

Yes original crossmember.. mine have those little through hole tabs on the A arm that the hard line and the rubber line join in.

dracko · 06-10-2016, 04:31 PM

Ahh gotcha...think I might just cut those off the old one and weld them up on the new arms.

IHutch5R · 06-10-2016, 04:45 PM

What crossmember did you do?

dracko · 06-10-2016, 04:49 PM

It's a 1981 crossmember

IHutch5R · 06-10-2016, 04:54 PM

Oh okay.. do you still have the old crossmember to get the tabs off? They are actually on the side of the coil springs housing.

dracko · 06-10-2016, 05:00 PM

Ya I just went out and cut them off, they'll work perfect once I decide where to tack them on. Thanks!

IHutch5R · 06-10-2016, 06:33 PM

Right on!

06-04-2016, 12:25 PM	#1
IHutch5R Registered User Join Date: Jul 2014 Location: Boise ID. Posts: 115	CPP Disc brake caliper question.. I've got my disc brake conversion all on the truck but in the box the calipers were in were these washers and I can't figure out where the darn things are supposed to go. There are two for each side and there are two mounting bolts that they fit on, i just cant figure out where they are supposed to sit. If anyone has done this kit before and can tell me or just knows, it would be much appreciated. I want to drive this thing already. Attached Images

06-04-2016, 02:03 PM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: CPP Disc brake caliper question.. Those are copper crush washers for the brake line, where it attaches to the caliper. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

06-04-2016, 10:36 PM	#4
Mjminino Registered User Join Date: Nov 2014 Location: Omaha Posts: 558	Re: CPP Disc brake caliper question.. Are you sure the ones for the brake line were copper crush ones? If so, then maybe they were extra.

06-04-2016, 10:39 PM	#5
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: CPP Disc brake caliper question.. Ya if they're copper they don't go on the suspension or chassis. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

06-04-2016, 11:18 PM	#6
O'larry Registered User Join Date: Apr 2012 Location: Wheat Ridge Colorado Posts: 17	Re: CPP Disc brake caliper question.. My CCP kit came with 2 extra crush washers

06-06-2016, 08:08 PM	#8
dracko Registered User Join Date: Jan 2010 Location: Regina, SK Posts: 809	Re: CPP Disc brake caliper question.. What is your plan for brake lines? I have the rubber hoses about 12" long but not really sure how or where to mount them to the new crossmember ('81).

06-10-2016, 10:42 AM	#10
dracko Registered User Join Date: Jan 2010 Location: Regina, SK Posts: 809	Re: CPP Disc brake caliper question.. Oh okay thanks. You still running the original crossmember? I'd buy prebent lines too but I prob won't have the prop valve in the stock location. Did you need to weld mounting tabs on the crossmember where the hardline/rubber line meet?

06-10-2016, 10:50 AM	#11
IHutch5R Registered User Join Date: Jul 2014 Location: Boise ID. Posts: 115	Re: CPP Disc brake caliper question.. Yes original crossmember.. mine have those little through hole tabs on the A arm that the hard line and the rubber line join in.

06-10-2016, 04:31 PM	#12
dracko Registered User Join Date: Jan 2010 Location: Regina, SK Posts: 809	Re: CPP Disc brake caliper question.. Ahh gotcha...think I might just cut those off the old one and weld them up on the new arms.

06-10-2016, 04:45 PM	#13
IHutch5R Registered User Join Date: Jul 2014 Location: Boise ID. Posts: 115	Re: CPP Disc brake caliper question.. What crossmember did you do?

06-10-2016, 04:49 PM	#14
dracko Registered User Join Date: Jan 2010 Location: Regina, SK Posts: 809	Re: CPP Disc brake caliper question.. It's a 1981 crossmember

06-10-2016, 04:54 PM	#15
IHutch5R Registered User Join Date: Jul 2014 Location: Boise ID. Posts: 115	Re: CPP Disc brake caliper question.. Oh okay.. do you still have the old crossmember to get the tabs off? They are actually on the side of the coil springs housing.

06-10-2016, 05:00 PM	#16
dracko Registered User Join Date: Jan 2010 Location: Regina, SK Posts: 809	Re: CPP Disc brake caliper question.. Ya I just went out and cut them off, they'll work perfect once I decide where to tack them on. Thanks!

06-10-2016, 06:33 PM	#17
IHutch5R Registered User Join Date: Jul 2014 Location: Boise ID. Posts: 115	Re: CPP Disc brake caliper question.. Right on!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.