Parting junk cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

beaterC10 · 03-09-2004, 11:31 PM

I am parting out a junk 75 or 76 cab before I scrap it. Prices are negotiable. Shipping additional from Indiananpolis (46229)

Heater control and all under dash ducting. Non-ac. Heater control is missing knobs, but seems to work smoothly $10

Inside rear mirror $5

Clutch and brake pedal assembly $20

Door hinges, need bushings, both doors $5

Firewall mounted heater box and motor $10

Windshield, has some wiper rash no cracks or antenna $20

Wiper motor $10

Instrument cluster, with idiot lights, speedo and gas gauge missing. Circuit board looks good, broken tab on left side. $5
Cab is junk, floor is rusted out and has sunroof cut-out. No vin tag or title.

Dave

79Chevypickup · 03-09-2004, 11:35 PM

How much for instrument pannel shipped to 77502

ALSO

How well does the wiper motor work?
if good

how much for both instrument pannel and wiper motor shipped to 77502

Looking for a total price for everything...
<Combined>
Parts = $15
Shipping = ?

beaterC10 · 03-10-2004, 06:15 PM

I'll make sure the wiper motor works and get back to you with shipping.

Dave

dswancutt · 03-10-2004, 11:26 PM

Dave;

Was this truck a 3 speed on the column and would you part out the column.

Doug

dswancutt · 03-10-2004, 11:33 PM

Dave;

Was this truck a 3 speed on the column and would you part out the column.

Doug

beaterC10 · 03-11-2004, 09:35 AM

Yes it was a 3 speed truck. What column parts did you need?

Dave

ghitch75 · 03-11-2004, 11:32 AM

where are you at in indy?...i'm in bloomfeild in and i would like the windshield i have some freinds that own land next to me and they could pick up the windshield for me i have a 75 k20 and i need it ..let me know ...thanks

beaterC10 · 03-11-2004, 12:27 PM

I'm on the eastside of Indy. Right off 10th Street, about 5 minutes from I-465, or I-70.

I can pull it and set it aside for you. I will be working Saturday to get the cab pulled apart and my neighbor's property values increased. lol.

ghitch75 · 03-11-2004, 12:37 PM

are you going to take it out this weekend?..the guy i'll have to pick it up comes down here every friday so let me know when you get it out and i'll have him come by and get it and he will pay you for it...btw are the doors any good?

beaterC10 · 03-11-2004, 01:29 PM

I was planning on pulling the parts starting Friday afternoon. I have one good door. It looks like a repop door with some surface rust on the area of the door adjacent to the cab windshield post. The rust is minor and will clean up. The seams where the door frame and skin meet are rust free. I think it is a driver's door, but I will have to check.

I will be gone Saturday morning, but will be around the rest of the weekend.

dswancutt · 03-11-2004, 04:23 PM

Dave;

What I am looking for is the guide on the back side of the bowl that holds the key ignition switch. This part guides the rack that controls both the steering lock & the rod to the ignition switch. I will try to post a picture from the manual tomorrow. Let me know what it's worth, either the guide or the switch bowl.

Doug

beaterC10 · 03-12-2004, 09:26 AM

Quote:

Originally posted by ghitch75
are you going to take it out this weekend?..the guy i'll have to pick it up comes down here every friday so let me know when you get it out and i'll have him come by and get it and he will pay you for it...btw are the doors any good?

I will have the windshield out Saturday monring. Did you still want it? I'll send a PM with my address and phone number.

beaterC10 · 03-12-2004, 02:06 PM

Quote:

Originally posted by dswancutt
Dave;

What I am looking for is the guide on the back side of the bowl that holds the key ignition switch. This part guides the rack that controls both the steering lock & the rod to the ignition switch. I will try to post a picture from the manual tomorrow. Let me know what it's worth, either the guide or the switch bowl.

Doug

Do you have a picture of the part you need? If not, I can take the column apart tomorrow and see if I understand your description better when I am looking at the parts.

Dave

79Chevypickup · 03-12-2004, 08:37 PM

Quote:

Originally posted by beaterC10
I'll make sure the wiper motor works and get back to you with shipping.

Dave

Just letting you know that I am waiting for the shipping info and to know about the wiper motor.

beaterC10 · 03-13-2004, 01:20 AM

I haven't forgotten. Iv'e been tied up this week. My plan is to be at in about 8 hours from now. Will have an answer tomorrow.

dswancutt · 03-13-2004, 01:28 AM

Dave;

I can't get the image to post to save my life. The piece is a flat quarter circle piece of metal held in by 2 screws. It is located on the backside of the "Bowl" between the shifter and the steering wheel.

Contact me offline and I will send you a adobe file that hopefully you can open.

Doug

dswancutt · 03-13-2004, 02:23 PM

Dave;

One more time. I am looking for Part #20.

Thanks;

Doug

dswancutt · 03-13-2004, 02:24 PM

Dave;

It worked. I also need the screws that hold it in.

Thanks;

Doug

beaterC10 · 03-13-2004, 02:38 PM

I have the column out. My bother borrowed my steering wheel puller and didn't return it. I will find him and have the column aprat this afternoon

beaterC10 · 03-13-2004, 02:38 PM

Quote:

Originally posted by 79Chevypickup

Just letting you know that I am waiting for the shipping info and to know about the wiper motor.

I sent you a pm

beaterC10 · 03-13-2004, 08:42 PM

Quote:

Originally posted by dswancutt
Dave;

What I am looking for is the guide on the back side of the bowl that holds the key ignition switch. This part guides the rack that controls both the steering lock & the rod to the ignition switch. I will try to post a picture from the manual tomorrow. Let me know what it's worth, either the guide or the switch bowl.

Doug

Success.

I have the colum apart everything looks to be in pretty good shape. Sent you a pm

dswancutt · 03-13-2004, 09:54 PM

Dave;

Sent you a pm.

Doug

03-09-2004, 11:31 PM	#1
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	Parting junk cab I am parting out a junk 75 or 76 cab before I scrap it. Prices are negotiable. Shipping additional from Indiananpolis (46229) Heater control and all under dash ducting. Non-ac. Heater control is missing knobs, but seems to work smoothly $10 Inside rear mirror $5 Clutch and brake pedal assembly $20 Door hinges, need bushings, both doors $5 Firewall mounted heater box and motor $10 Windshield, has some wiper rash no cracks or antenna $20 Wiper motor $10 Instrument cluster, with idiot lights, speedo and gas gauge missing. Circuit board looks good, broken tab on left side. $5 Cab is junk, floor is rusted out and has sunroof cut-out. No vin tag or title. Dave Last edited by beaterC10; 03-10-2004 at 07:29 PM.

03-10-2004, 11:26 PM	#4
dswancutt Registered User Join Date: Jul 2003 Location: Franklin, NE Posts: 387	Parting junk cab Dave; Was this truck a 3 speed on the column and would you part out the column. Doug

03-10-2004, 11:33 PM	#5
dswancutt Registered User Join Date: Jul 2003 Location: Franklin, NE Posts: 387	Parting junk cab Dave; Was this truck a 3 speed on the column and would you part out the column. Doug

03-11-2004, 12:27 PM	#8
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	I'm on the eastside of Indy. Right off 10th Street, about 5 minutes from I-465, or I-70. I can pull it and set it aside for you. I will be working Saturday to get the cab pulled apart and my neighbor's property values increased. lol. Last edited by beaterC10; 03-11-2004 at 12:30 PM.

03-11-2004, 04:23 PM	#11
dswancutt Registered User Join Date: Jul 2003 Location: Franklin, NE Posts: 387	Parting junk cab Dave; What I am looking for is the guide on the back side of the bowl that holds the key ignition switch. This part guides the rack that controls both the steering lock & the rod to the ignition switch. I will try to post a picture from the manual tomorrow. Let me know what it's worth, either the guide or the switch bowl. Doug

03-09-2004, 11:35 PM	#2
79Chevypickup MY TRUCK IS FOR SALE!! Join Date: Sep 2003 Location: Pasadena, TX Posts: 292	instrument pannel How much for instrument pannel shipped to 77502 ALSO How well does the wiper motor work? if good how much for both instrument pannel and wiper motor shipped to 77502 Looking for a total price for everything... <Combined> Parts = $15 Shipping = ? __________________ 1979 Chevy LWB 350ci / 700R4 Edelbrock under the hood F O R S A L E OR T R A D E

03-10-2004, 06:15 PM	#3
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	I'll make sure the wiper motor works and get back to you with shipping. Dave

03-11-2004, 09:35 AM	#6
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	Yes it was a 3 speed truck. What column parts did you need? Dave

03-11-2004, 11:32 AM	#7
ghitch75 Registered User Join Date: Mar 2004 Location: B.F.E. Indiana Posts: 92	where are you at in indy?...i'm in bloomfeild in and i would like the windshield i have some freinds that own land next to me and they could pick up the windshield for me i have a 75 k20 and i need it ..let me know ...thanks

03-11-2004, 12:37 PM	#9
ghitch75 Registered User Join Date: Mar 2004 Location: B.F.E. Indiana Posts: 92	are you going to take it out this weekend?..the guy i'll have to pick it up comes down here every friday so let me know when you get it out and i'll have him come by and get it and he will pay you for it...btw are the doors any good?

03-11-2004, 01:29 PM	#10
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	I was planning on pulling the parts starting Friday afternoon. I have one good door. It looks like a repop door with some surface rust on the area of the door adjacent to the cab windshield post. The rust is minor and will clean up. The seams where the door frame and skin meet are rust free. I think it is a driver's door, but I will have to check. I will be gone Saturday morning, but will be around the rest of the weekend.

03-13-2004, 01:20 AM	#15
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	I haven't forgotten. Iv'e been tied up this week. My plan is to be at in about 8 hours from now. Will have an answer tomorrow.

03-13-2004, 01:28 AM	#16
dswancutt Registered User Join Date: Jul 2003 Location: Franklin, NE Posts: 387	Parting Junk Cab Dave; I can't get the image to post to save my life. The piece is a flat quarter circle piece of metal held in by 2 screws. It is located on the backside of the "Bowl" between the shifter and the steering wheel. Contact me offline and I will send you a adobe file that hopefully you can open. Doug

03-13-2004, 02:23 PM	#17
dswancutt Registered User Join Date: Jul 2003 Location: Franklin, NE Posts: 387	Parting Junk Cab Dave; One more time. I am looking for Part #20. Thanks; Doug

03-13-2004, 02:24 PM	#18
dswancutt Registered User Join Date: Jul 2003 Location: Franklin, NE Posts: 387	Parting Junk Cab Dave; It worked. I also need the screws that hold it in. Thanks; Doug



Register or Log In To remove these advertisements.

03-13-2004, 02:38 PM	#19
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	I have the column out. My bother borrowed my steering wheel puller and didn't return it. I will find him and have the column aprat this afternoon

03-13-2004, 09:54 PM	#22
dswancutt Registered User Join Date: Jul 2003 Location: Franklin, NE Posts: 387	Parting Junk Cab Dave; Sent you a pm. Doug

Register or Log In To remove these advertisements.