NV Parts for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TrkEnvy · 07-01-2016, 11:01 PM

Cleaning out the garage a bit and selling off some parts so I can raise some money for getting my project on the road.
67-72 3/4 caps. #4
I know these are in need of a clean up and someone tried to paint the bow ties but it can be cleaned up and I have heard they are quite rare so Id like to get $200 shipped for them.
Prefer PayPal for payment.

TrkEnvy · 07-01-2016, 11:20 PM

I have a edelbrock performer rpm manifold for vortec heads. Great upgrade for a sbc on the cheap. I also have a set of 906 heads that I pulled. Haven't been magnifluxed or anything but they came off a running truck. I would rather not ship those.
I'd like $150 shipped for the manifold.

**jimer1964** · 07-02-2016, 12:51 PM

I will Take The Caps !

TrkEnvy · 07-02-2016, 12:55 PM

Caps to jimer1964. Thanks brother. I have some other stuff to list but I haven't taken pics of it yet.
Brown glove box door with custom 10 badge
2 inch drop blocks and u bolts
Some valve covers
And other stuff soon.

I'm also curious. I went with cpp drop spindles but the stock spindles off my 71 are still good. Are they worth anything to guys from 67-70 upgrading to discs and want stock height??

TrkEnvy · 07-02-2016, 07:38 PM

Gold glove box door with latch and intact spid. - $40.00 shipped.

TrkEnvy · 07-03-2016, 12:30 AM

Radio patch panel. I bought this off 402Bowtie to repair my hacked dash until I realized that the ears had been cut a folded back. I pushed em backround and with a welder and dolly they are good! So here I pass it on to the next hackee of PO. I paid bowtie $42 bucks for it so that's what I'm charging. $42 shipped.

TrkEnvy · 07-03-2016, 03:45 PM

New prices. Ttt

07-01-2016, 11:01 PM	#1
TrkEnvy Registered User Join Date: Apr 2011 Location: Las Vegas, NV Posts: 264	Parts for sale Cleaning out the garage a bit and selling off some parts so I can raise some money for getting my project on the road. 67-72 3/4 caps. #4 I know these are in need of a clean up and someone tried to paint the bow ties but it can be cleaned up and I have heard they are quite rare so Id like to get $200 shipped for them. Prefer PayPal for payment. __________________ 1971 C10 - LWB shortened to SWB, welded in my C notch, reinforced trailing arms with 3/16 plate, new cpp 5" rear drop springs, 2" drop blocks, ece super panhard kit. Cpp drop spindles, 2 inch front springs, 5.3/4L80E I call it Bruce Banner.. Last edited by TrkEnvy; 07-02-2016 at 11:37 AM.

07-01-2016, 11:20 PM	#2
TrkEnvy Registered User Join Date: Apr 2011 Location: Las Vegas, NV Posts: 264	Re: Parts for sale I have a edelbrock performer rpm manifold for vortec heads. Great upgrade for a sbc on the cheap. I also have a set of 906 heads that I pulled. Haven't been magnifluxed or anything but they came off a running truck. I would rather not ship those. I'd like $150 shipped for the manifold. __________________ 1971 C10 - LWB shortened to SWB, welded in my C notch, reinforced trailing arms with 3/16 plate, new cpp 5" rear drop springs, 2" drop blocks, ece super panhard kit. Cpp drop spindles, 2 inch front springs, 5.3/4L80E I call it Bruce Banner.. Last edited by TrkEnvy; 07-03-2016 at 03:45 PM.

07-02-2016, 12:51 PM	#3
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,684	Re: Parts for sale I will Take The Caps !

07-02-2016, 07:38 PM	#5
TrkEnvy Registered User Join Date: Apr 2011 Location: Las Vegas, NV Posts: 264	Re: Parts for sale Gold glove box door with latch and intact spid. - $40.00 shipped. __________________ 1971 C10 - LWB shortened to SWB, welded in my C notch, reinforced trailing arms with 3/16 plate, new cpp 5" rear drop springs, 2" drop blocks, ece super panhard kit. Cpp drop spindles, 2 inch front springs, 5.3/4L80E I call it Bruce Banner.. Last edited by TrkEnvy; 07-03-2016 at 03:44 PM.

07-03-2016, 12:30 AM	#6
TrkEnvy Registered User Join Date: Apr 2011 Location: Las Vegas, NV Posts: 264	Re: Parts for sale Radio patch panel. I bought this off 402Bowtie to repair my hacked dash until I realized that the ears had been cut a folded back. I pushed em backround and with a welder and dolly they are good! So here I pass it on to the next hackee of PO. I paid bowtie $42 bucks for it so that's what I'm charging. $42 shipped. __________________ 1971 C10 - LWB shortened to SWB, welded in my C notch, reinforced trailing arms with 3/16 plate, new cpp 5" rear drop springs, 2" drop blocks, ece super panhard kit. Cpp drop spindles, 2 inch front springs, 5.3/4L80E I call it Bruce Banner..

07-02-2016, 12:55 PM	#4
TrkEnvy Registered User Join Date: Apr 2011 Location: Las Vegas, NV Posts: 264	Re: Parts for sale Caps to jimer1964. Thanks brother. I have some other stuff to list but I haven't taken pics of it yet. Brown glove box door with custom 10 badge 2 inch drop blocks and u bolts Some valve covers And other stuff soon. I'm also curious. I went with cpp drop spindles but the stock spindles off my 71 are still good. Are they worth anything to guys from 67-70 upgrading to discs and want stock height?? __________________ 1971 C10 - LWB shortened to SWB, welded in my C notch, reinforced trailing arms with 3/16 plate, new cpp 5" rear drop springs, 2" drop blocks, ece super panhard kit. Cpp drop spindles, 2 inch front springs, 5.3/4L80E I call it Bruce Banner..

07-03-2016, 03:45 PM	#7
TrkEnvy Registered User Join Date: Apr 2011 Location: Las Vegas, NV Posts: 264	Re: Parts for sale New prices. Ttt __________________ 1971 C10 - LWB shortened to SWB, welded in my C notch, reinforced trailing arms with 3/16 plate, new cpp 5" rear drop springs, 2" drop blocks, ece super panhard kit. Cpp drop spindles, 2 inch front springs, 5.3/4L80E I call it Bruce Banner..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.