CA Parting 70 Big Block Longhorn - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shawno72 · 03-19-2012, 07:50 PM

Hey Ray I need a good auto trans crossmember, you headed this way again any time soon?

70LonghornCST · 03-19-2012, 08:07 PM

Awsome! Thank you, Ray. Valuable information as I try to recreate the firewall markings that I covered up.
-Richard

KrazyRay · 03-19-2012, 08:18 PM

Shawn, I will be rolling through in the next couple of weeks. $10 for one.
Thanks,
Ray

no moa · 03-20-2012, 09:10 AM

Ray, got the door,great transaction, Super fast shipping, thank you again.

**tll74** · 03-20-2012, 03:25 PM

[QUOTE=KrazyRay;5262069]Tom...The date code is A 22 71 Jan. 22 1971?

Hi Ray, Yes that would be correct. I'll take it pending cost. Shipping to 97448 and a business. Thanks, Tom

shawno72 · 03-20-2012, 03:38 PM

Quote:

Originally Posted by KrazyRay

Shawn, I will be rolling through in the next couple of weeks. $10 for one.
Thanks,
Ray

I'll take it!! would you happen to have a good drive line for that turbo 350 with a short bed?? You still have my number right?

**michael bustamante** · 03-20-2012, 05:48 PM

do you still have the 400 tranny kickdown swithch and all associated?

KrazyRay · 03-20-2012, 05:53 PM

Glen...Thanks again!

Tom...$33 shipped for the water pump.

Shawn...I still have your number. I will bring the crossmember. Sorry, no driveline.

Thanks,
Ray

shawno72 · 03-20-2012, 05:59 PM

Thanks Ray. Hey by the way I am going to have to pass on those plates for now.

**tll74** · 03-21-2012, 02:12 AM

I'll take it. Thanks Tom

shawno72 · 03-28-2012, 09:53 AM

Quote:

Originally Posted by KrazyRay

Shawn, I will be rolling through in the next couple of weeks. $10 for one.
Thanks,
Ray

Good morning Ray. One more thing to go with the crossmember, do you have the zbar pivot ball that screws into the side of a v8 block?
Posted via Mobile Device

MadnessBigBlock · 03-28-2012, 07:20 PM

Ray, Did the first guy buy the throttle rod? I know I was second in line. Also any spark plug heat shields?
Posted via Mobile Device

**Dieselwrencher** · 03-28-2012, 07:41 PM

Is there any Longhorn bed trim pieces available? Thanks Ryan.

KrazyRay · 03-28-2012, 09:03 PM

Shawn...I will dig through some boxes to see if I have one.

Madness...Sorry, they were sold.

Ryan...The bed trim pieces all have dings. The uppers have some small dings and the driver side upper needs a new end piece(same as long bed) The driver side lower front has a couple dings and the passenger side lower front has a 3" smashed section. $40 plus shipping for the 4 pieces.

Thanks,
Ray

**FLchevygrl** · 03-28-2012, 11:51 PM

Do you still have the battery tray? If so please give cost with shipping to 34243. I want pending shipping costs.

thanks

KrazyRay · 03-29-2012, 12:38 AM

The shipping is $16 for a total of $41 shipped for the ac battery tray.
Thanks,
Ray

KrazyRay · 03-30-2012, 11:36 PM

Quote:

Originally Posted by shawno72

Good morning Ray. One more thing to go with the crossmember, do you have the zbar pivot ball that screws into the side of a v8 block?
Posted via Mobile Device

I think this is the one you are looking for...$5 and I will bring it with the at crossmember.

shawno72 · 03-31-2012, 12:02 AM

Sounds great Ray, I'm so glad you found one. Thank you and see you soon?
Posted via Mobile Device

**Dieselwrencher** · 04-16-2012, 11:06 PM

Sorry, wrong thread. Can a mod delete the pics?

CousinTone · 07-03-2016, 08:43 PM

Looking for bed. Is it still available? If yes, how much r u asking! Local pickup

KrazyRay · 07-04-2016, 02:01 AM

Sorry no longhorn beds. Thanks

03-19-2012, 07:50 PM	#101
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Parting 70 Big Block Longhorn Hey Ray I need a good auto trans crossmember, you headed this way again any time soon? __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-19-2012, 08:07 PM	#102
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Parting 70 Big Block Longhorn Awsome! Thank you, Ray. Valuable information as I try to recreate the firewall markings that I covered up. -Richard __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

03-19-2012, 08:18 PM	#103
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 70 Big Block Longhorn Shawn, I will be rolling through in the next couple of weeks. $10 for one. Thanks, Ray

03-20-2012, 09:10 AM	#104
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: Parting 70 Big Block Longhorn Ray, got the door,great transaction, Super fast shipping, thank you again. __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

03-20-2012, 03:25 PM	#105
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting 70 Big Block Longhorn [QUOTE=KrazyRay;5262069]Tom...The date code is A 22 71 Jan. 22 1971? Hi Ray, Yes that would be correct. I'll take it pending cost. Shipping to 97448 and a business. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

03-20-2012, 05:48 PM	#107
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: Parting 70 Big Block Longhorn do you still have the 400 tranny kickdown swithch and all associated? __________________ 1967custom

03-20-2012, 05:53 PM	#108
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 70 Big Block Longhorn Glen...Thanks again! Tom...$33 shipped for the water pump. Shawn...I still have your number. I will bring the crossmember. Sorry, no driveline. Thanks, Ray

03-20-2012, 05:59 PM	#109
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Parting 70 Big Block Longhorn Thanks Ray. Hey by the way I am going to have to pass on those plates for now. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-21-2012, 02:12 AM	#110
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting 70 Big Block Longhorn I'll take it. Thanks Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

03-28-2012, 07:20 PM	#112
MadnessBigBlock Registered User Join Date: May 2008 Location: Neche, North Dakota/Winnipeg, Manitoba Posts: 605	Re: Parting 70 Big Block Longhorn Ray, Did the first guy buy the throttle rod? I know I was second in line. Also any spark plug heat shields? Posted via Mobile Device

03-28-2012, 07:41 PM	#113
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Parting 70 Big Block Longhorn Is there any Longhorn bed trim pieces available? Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

03-28-2012, 09:03 PM	#114
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 70 Big Block Longhorn Shawn...I will dig through some boxes to see if I have one. Madness...Sorry, they were sold. Ryan...The bed trim pieces all have dings. The uppers have some small dings and the driver side upper needs a new end piece(same as long bed) The driver side lower front has a couple dings and the passenger side lower front has a 3" smashed section. $40 plus shipping for the 4 pieces. Thanks, Ray

03-28-2012, 11:51 PM	#115
FLchevygrl Active Member Join Date: Mar 2012 Location: Sarasota,Fl Posts: 177	Re: Parting 70 Big Block Longhorn Do you still have the battery tray? If so please give cost with shipping to 34243. I want pending shipping costs. thanks

03-29-2012, 12:38 AM	#116
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 70 Big Block Longhorn The shipping is $16 for a total of $41 shipped for the ac battery tray. Thanks, Ray

03-31-2012, 12:02 AM	#118
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Parting 70 Big Block Longhorn Sounds great Ray, I'm so glad you found one. Thank you and see you soon? Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"



Register or Log In To remove these advertisements.

04-16-2012, 11:06 PM	#119
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Parting 70 Big Block Longhorn Sorry, wrong thread. Can a mod delete the pics? Attached Images __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

07-03-2016, 08:43 PM	#120
CousinTone Registered User Join Date: Jul 2015 Location: Placentia, CA Posts: 344	Re: Parting 70 Big Block Longhorn Looking for bed. Is it still available? If yes, how much r u asking! Local pickup

07-04-2016, 02:01 AM	#121
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 70 Big Block Longhorn Sorry no longhorn beds. Thanks

Register or Log In To remove these advertisements.