|
03-13-2004, 08:12 PM
|
#1 |
|
Registered User
Join Date: Jan 2003
Location: Medicine Hat, Alberta,Canada
Posts: 64
|
Spindle bolts
Need 4-6 Spindle bolts for my 70 Dana front end, Mine went missing, IMAGINE THAT!!!!
__________________
1970 Longhorn, factory air & Cruise,Tach vac 1970 C 20 3/4 4x4 350 with turbo 350 auto, |
|
|
|
03-13-2004, 09:42 PM
|
#2 |
|
Born Psycho
 
Join Date: Feb 2001
Location: brentwood,cal,usa
Posts: 4,936
|
MnG,
I have a 70 dana 44, 3/4 ton front axle i'm converting over to discs. i have all the pieces except the drums and locking hubs so i'm sure i have what you need. shoot me a call @925-634-2512 so i can be positive on what you're looking for. or you can email a pic to 6772chevy@sbcglobal.net. if i have what you need, i'll send it for the cost of shipping.
__________________
jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA |
|
|
|
03-14-2004, 05:14 PM
|
#3 |
|
Registered User
Join Date: Jan 2003
Location: Medicine Hat, Alberta,Canada
Posts: 64
|
Bolts
Thanks Jerry; I could suren use the bolts, They are 1 9/16" long, 3/8" bolts with fine thread ( approximately 13/16" of thread ) and have the bolt head ground off. Flat edge is about 1/2" long. If yours are the same please foreward them. Let me know the damage for shipping ( fast mail if you can ). Will owe you one.
thanks Rick Rick Baker 301 9th St. S.E. Medicine Hat Alberta, Canada T1A 1N4 
__________________
1970 Longhorn, factory air & Cruise,Tach vac 1970 C 20 3/4 4x4 350 with turbo 350 auto, |
|
|
|
|
03-14-2004, 05:15 PM
|
#4 |
|
Registered User
Join Date: Jun 2002
Location: Show Low, Arizona
Posts: 211
|
bolts
you can buy them at your nearest auto store i thinkl i paid 10 or 15 for both sets
|
|
|
|
|
03-14-2004, 06:00 PM
|
#5 |
|
Registered User
Join Date: Jan 2003
Location: Medicine Hat, Alberta,Canada
Posts: 64
|
You guys sure are funny
What is common place for you guys in the US is verry uncommon for us up here, all the little every day things become hard to find or just impossible for us upp here especially wher I live, its 200 miles from any major center and then if its not a current part in the computer you are just plain out of luck. I tried a couple of our parts stores and the dealer.
__________________
1970 Longhorn, factory air & Cruise,Tach vac 1970 C 20 3/4 4x4 350 with turbo 350 auto, |
|
|
|
|
03-15-2004, 02:06 AM
|
#6 |
|
Born Psycho
Join Date: Feb 2001
Location: brentwood,cal,usa
Posts: 4,936
|
Rick,
mine has studs with nuts on them, not bolts. sorry 
__________________
jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
