|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-15-2016, 08:01 PM
|
#1 |
|
Registered User
Join Date: Mar 2015
Location: Oklahoma
Posts: 40
|
New front end on my 64
Hey folks I've got some questions. I have my spindles. They are listed as fitting trucks from 73-87. Now the front end parts. Ball joints, tie rods, rotors, etc. what year is the best to get for my set up. The truck is a 64 Chevy c10. Going with disc brakes on the fron only. Also any recommendations on the brake lines I need. All I find in my magazines just say manual brakes for my truck year. Any help would be greatly appreciated. Thanks
Posted via Mobile Device |
|
|
|
07-15-2016, 11:53 PM
|
#2 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: New front end on my 64
Since you have '73-'87 spindles, you need the rest of the components for the same year range. I always recommend upgrading the entire steering linkage also. That way all of the steering and braking components are of the same year range or specific year. To upgrade the idler arm, you will have to position it correctly on the frame and drill the holes. You will want to keep the draglink parallel to both the bottom of the frame and the suspension crossmember.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
07-15-2016, 11:56 PM
|
#3 |
|
Registered User
Join Date: Mar 2015
Location: Oklahoma
Posts: 40
|
Re: New front end on my 64
Ok. Thanks for the info.
Posted via Mobile Device |
|
|
|
|
07-22-2016, 06:12 PM
|
#4 |
|
Registered User
Join Date: Mar 2015
Location: Oklahoma
Posts: 40
|
Re: New front end on my 64
So what the ball joints. I have my original control arms. So do I order my year or the spindle year for the ball joints.
Posted via Mobile Device |
|
|
|
|
07-22-2016, 11:45 PM
|
#5 | ||
|
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: New front end on my 64
That includes ball joints
Quote:
Quote:
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
||
|
|
|
|
07-22-2016, 11:47 PM
|
#6 |
|
Registered User
Join Date: Mar 2015
Location: Oklahoma
Posts: 40
|
Re: New front end on my 64
Control arms are fine tho right?
Posted via Mobile Device |
|
|
|
|
07-22-2016, 11:55 PM
|
#7 |
|
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: New front end on my 64
Yes. The '73-'87 ball joints will fit your original control arms just like the original ball joints did.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
07-22-2016, 11:56 PM
|
#8 |
|
Registered User
Join Date: Mar 2015
Location: Oklahoma
Posts: 40
|
Re: New front end on my 64
Ok. I'll be so glad when I get this done. Thanks for the advice.
Posted via Mobile Device |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
