|
03-15-2004, 08:34 PM
|
#1 |
|
Registered User
Join Date: Nov 2003
Location: Central NY
Posts: 93
|
Disc brakes questions
I am looking to do the disc brake conversion. I already have a donor truck a 1983 chevy. I want to use the upper and lower A-arms along with the steering components. My questions are..
1. Do I use the shims from the donor truck or do I use the ones in my truck, I mean the shims for the A-arms mounting point. 2. Can I use all of the tie rods centerlink pitman arm and such from the donor truck on my truck, do they fit right on. 3. Can I use the master cylinder and proportioning valve from the donor truck and still use my original power drum brake Booster. Thats it for now any help would be great,
__________________
69 Chevelle (Summer only ride, love to drive this) 72 Chevy Shortbox 4x2 (newest addition) 83 Chevy Shortbox 4x2 (project but its clean) 2001 S10 Ext. Cab 4x4 (daily driver) |
|
|
|
03-15-2004, 11:59 PM
|
#2 |
|
Registered User
Join Date: Nov 2003
Location: Central NY
Posts: 93
|
ttt
__________________
69 Chevelle (Summer only ride, love to drive this) 72 Chevy Shortbox 4x2 (newest addition) 83 Chevy Shortbox 4x2 (project but its clean) 2001 S10 Ext. Cab 4x4 (daily driver) |
|
|
|
|
03-16-2004, 04:10 AM
|
#3 |
|
Senior Member
 Join Date: Mar 2000
Location: Rockville,In. USA
Posts: 3,721
|
#1- Either one though the amount used on donor truck should get you close, but you will still need a front end alignment done.
#2- Yes use it all. #3- Master Cyl. & Prop Valve should be used from the donor and will bolt to your booster just fine. GMCPaul |
|
|
|
|
03-16-2004, 08:05 AM
|
#4 |
|
Registered User
Join Date: Nov 2003
Location: Central NY
Posts: 93
|
Thanks for answering all my questions GMCPAUL this will be a great help.
__________________
69 Chevelle (Summer only ride, love to drive this) 72 Chevy Shortbox 4x2 (newest addition) 83 Chevy Shortbox 4x2 (project but its clean) 2001 S10 Ext. Cab 4x4 (daily driver) |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
