'67 Ignition Switch Housing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Lobo'74 · 03-13-2004, 03:32 PM

I just bought a '67 chrome ignition switch housing. PO set up the ignition switch as an "outie" instead of the stock "innie". I want it stock looking so I got the switch. Goes on fine, but I obviously need some typs of spacer behind the dash pushing the switch back. As it is, it flops forward out of the instrument panel.... So I had to put it back together as PO had it(for now).

I do not know if ITruck is early or late '67. The ignition switch retainer bezel I got is for the early '67 truck. Are the ignition switch spacers the same for both? I haven't seen a spacer marked "early '67", only late. Does this mean only the late '67's needed the spacer and I bought the wrong part?

As usual, thanks for any information y'all might provide.

crazy4chevs · 03-13-2004, 08:48 PM

a pic might help (give you more responces), but i think they both take spacers. I believe the one you need is the shorter one.

pickupman · 03-13-2004, 09:48 PM

the 67 switch spacer is different than the 68-72 spacer. I have not run into a difference between an eary and late 67. I probably have a used one. I can check when I get to the shop tomorrow if interested.
Thanks,Bill

Lobo'74 · 03-13-2004, 11:52 PM

Yes, I'm very interested. Thanks for any help. Don't know if you remember me - I got all my window and door rubber replacement from you about a year ago.Sure helps quiet the rattles.

pickupman · 03-15-2004, 05:33 PM

Sorry, I have looked and don't have any left.
Bill

Lobo'74 · 03-16-2004, 12:13 PM

I appreciate your looking for it.

03-13-2004, 03:32 PM	#1
Lobo'74 Registered User Join Date: Nov 2002 Location: Charlottesville, VA Posts: 404	'67 Ignition Switch Housing I just bought a '67 chrome ignition switch housing. PO set up the ignition switch as an "outie" instead of the stock "innie". I want it stock looking so I got the switch. Goes on fine, but I obviously need some typs of spacer behind the dash pushing the switch back. As it is, it flops forward out of the instrument panel.... So I had to put it back together as PO had it(for now). I do not know if ITruck is early or late '67. The ignition switch retainer bezel I got is for the early '67 truck. Are the ignition switch spacers the same for both? I haven't seen a spacer marked "early '67", only late. Does this mean only the late '67's needed the spacer and I bought the wrong part? As usual, thanks for any information y'all might provide. __________________ "Truck" '67 small window '79 350 .030 over, LT1 "clone"

03-13-2004, 08:48 PM	#2
crazy4chevs Registered User Join Date: Oct 2002 Location: Des Moines WA. (Kent, area) Posts: 668	a pic might help (give you more responces), but i think they both take spacers. I believe the one you need is the shorter one. __________________ 70 chev c10 swb fleet 72 grill, sb 400, 2/4 drop. 68 chev c10 swb fleet Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C Classic GM Truck Club of Washington .

03-13-2004, 09:48 PM	#3
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	the 67 switch spacer is different than the 68-72 spacer. I have not run into a difference between an eary and late 67. I probably have a used one. I can check when I get to the shop tomorrow if interested. Thanks,Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

03-13-2004, 11:52 PM	#4
Lobo'74 Registered User Join Date: Nov 2002 Location: Charlottesville, VA Posts: 404	Most definately Yes, I'm very interested. Thanks for any help. Don't know if you remember me - I got all my window and door rubber replacement from you about a year ago.Sure helps quiet the rattles. __________________ "Truck" '67 small window '79 350 .030 over, LT1 "clone"

03-15-2004, 05:33 PM	#5
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Sorry, I have looked and don't have any left. Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

03-16-2004, 12:13 PM	#6
Lobo'74 Registered User Join Date: Nov 2002 Location: Charlottesville, VA Posts: 404	Thanks I appreciate your looking for it. __________________ "Truck" '67 small window '79 350 .030 over, LT1 "clone"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.