|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-04-2016, 11:40 PM
|
#1 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,402
|
Trucks at SEA Galley cruise night Union Gap WA
Every year during the Vintiques of Yakima Northwest Nationals Sea Galley Restaurant in Union Gap holds a cruise night that is open to all enthusiast vehicles. The variety is wide an changing as the evening goes on.
Here are the Chevy and GMC trucks that were there and I am including some 67/72 in the mix.   This little black truck is about as straight as they get and really nicely turned out.      
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. Last edited by mr48chev; 08-05-2016 at 12:03 AM. |
|
|
|
08-05-2016, 12:06 AM
|
#2 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,402
|
Re: Trucks at SEA Galley cruise night Union Gap WA
[URL=http://s173.photobucket.com/user/mr48chev/media/2016%20Sea%20Galley%20cruise%20night/DSCN5789.jpg.html]
     
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
08-05-2016, 12:14 AM
|
#3 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,402
|
Re: Trucks at SEA Galley cruise night Union Gap WA
  Dash of the chopped black primer truck         Just for the six cylinder folks  
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
08-05-2016, 11:32 AM
|
#4 |
|
Registered User
Join Date: Jun 2012
Location: Southern Iowa
Posts: 944
|
Re: Trucks at SEA Galley cruise night Union Gap WA
My computer must be upset because I can't see any of the pictures.
__________________
Jimi J from I-Oh-Way '57 Panel 3105 Met this deer... Roof Swap on my Panel Jim's Bread Truck |
|
|
|
|
08-05-2016, 12:06 PM
|
#5 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,402
|
Re: Trucks at SEA Galley cruise night Union Gap WA
Here is the link to the photobucket album I have them in.
http://s173.photobucket.com/user/mr4...?sort=2&page=1 See if it works . I checked on my wife's laptop while not being logged in and it works
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. Last edited by mr48chev; 08-05-2016 at 12:17 PM. |
|
|
|
|
08-06-2016, 06:28 AM
|
#6 |
|
Senior Member
 Join Date: Jan 2016
Location: Appleton Washington
Posts: 585
|
Re: Trucks at SEA Galley cruise night Union Gap WA
Just right down the road
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
