Energy Suspension Hyperflex Bushings FS

[1FaastC10]

i've got a complete set of Energy Suspension Hyperflex bushings for a 73-80 C10 that i need to get rid of. $150.00 OBO this is the LAST 2wd part i have that is not already spoken for, and i'd like to make it disappear so im not tempted to buy something and use it on. brand new and still in the box.

[rogf4]

Over priced check in jegs you can get these for half this much

[gldevall]

I'd like to know which Jegs you are shopping at! Jegs has this one listed:
355-3-18109R
73-80 GM 1/2 Ton Trucks 2WD
$183.99

[blink32]

Originally posted by gldevall
I'd like to know which Jegs you are shopping at! Jegs has this one listed:
355-3-18109R
73-80 GM 1/2 Ton Trucks 2WD
$183.99

Looks like some post flaming/revenge/whatever:

http://67-72chevytrucks.com/vboard/s...threadid=94940

[gldevall]

Originally posted by blink32



Looks like some post flaming/revenge/whatever:

http://67-72chevytrucks.com/vboard/s...threadid=94940

Yeah, there was another poast on here about the same thing. I guess Jeremy deleted and tried to start it over, but it looks like it is headed in the same direction.

[1FaastC10]

well, since the n00b is trying to take me down, i guess i'll go ahead and put a reply into my own post, similar to the post that i deleted. i am in no way trying to get rich here, unlike some members. its very obvious that i am selling these parts at a loss. many of you guys have cut me great deals on parts that i couldnt find elsewhere, so i thought i'd return the favor. nothing pisses me off like an "enthusiast" (if you can call him that), like rogf4. he buys parts, and decides he's going to make phat cast on them. my post was simply to let others know about the cheaper price, to avoid getting taken by this guy. i was simply watching out for my fellow enthusiasts.

[rogf4]

I posted my ad I am not trying to rip anyone off You have to have a starting point I was always taught if you did not have something positive to say keep your mouth shut I bought a complete kit and did not need the cab bushings so I posted them here This is what I gave for them I did not buy them from jegs I bought them from a local parts store. If you have something negative to say Pm me or call dont reply to my post
Roger

[1FaastC10]

Originally posted by rogf4
I posted my ad I am not trying to rip anyone off You have to have a starting point I was always taught if you did not have something positive to say keep your mouth shut I bought a complete kit and did not need the cab bushings so I posted them here This is what I gave for them I did not buy them from jegs I bought them from a local parts store. If you have something negative to say Pm me or call dont reply to my post
Roger

look, n00b, i posted my parts at a fair price. since you feel your parts are superior to mine, please, feel free to try and sell them at the sky high price you posted. how can anyone trust that you've even still got the complete busing kit? you bought the kit, and used part of it. automatically, in my book, makes it worth less. if it was in a factory box, and had the part number on it, then yes, it may be worth the Jeg's price. no box, no full price, get it? i was going to stoop to your level, and edit my response in your post, but decided that i am too mature for that. besides, that would do nothing but bring more overpriced crap to the top of the board.

with that said, any interest?

[rogf4]

If you were mature you would not have responded to my post in the way you did in the first place. I never said my parts were superior to yours. We all are trying to do the same thing here help someone find what they need and get rid of parts you dont need
Roger

[1FaastC10]

as stated earlier, i decided it was the more mature thing to do to keep out of rogf4's post, and i have stuck with my word, i'm not going to post in his thread anymore. however, after my previous post, i figured you guys would like to see the PM that he sent me. keep in mind that i have NEVER PMed this guy before. everything that has been said between him and i has been on the board, and posted for all of you to see.

recieved via PM:
rogf4 wrote on 03-15-2004 06:34 PM:
Listen you ****ing prick do not respond to my post any more I told you if you have any thing to say keep it off the board You started this **** so end it.
Roger

i've kept up my end so far, how about taking your own advice a-hat?

[rogf4]

Originally posted by 1FaastC10


look, n00b, i posted my parts at a fair price. since you feel your parts are superior to mine, please, feel free to try and sell them at the sky high price you posted. how can anyone trust that you've even still got the complete busing kit? you bought the kit, and used part of it. automatically, in my book, makes it worth less. if it was in a factory box, and had the part number on it, then yes, it may be worth the Jeg's price. no box, no full price, get it? i was going to stoop to your level, and edit my response in your post, but decided that i am too mature for that. besides, that would do nothing but bring more overpriced crap to the top of the board.

with that said, any interest?

A master kit comes in one large box with the parts blister sealed on cardboard so how could anything be missing it has not been opened

[1FaastC10]

i'd greatly appreciate it if you would quit whoring up my post. i have done so with your post. Tyler has been notified.

[bigblock73]

Jeremy, just delete this thread and start a new one.

If he buts in and starts up again...report him to a mod..if you haven't already.

THE BOTTOM LINE HERE IS...IF YOU DON'T LIKE THE PRICE OF SOMETHING...MOVE ON!!

Here is a excerpt straight from the forum rules and guidelines...

12) It is against our policy for someone to post a complaint about a member’s
price on whatever they are selling. If you don't like the price then skip it.
Let it drop to the bottom on its own. They (potential buyers) will figure it
out, why nobody is jumping on that particular item.

[1FaastC10]

Jeff, i've already deleted the thread once, so i dont see a point in doing it again. and Tyler has been notified. my guess would be that if i did delete it and start over, our friend would continue in his a-hattish ways. did i just create a new word?

[truckman32]

can't we all just get along ....come on guys it's not up to us to keep track of everything that is sold on here heres what you do just say iiiiiii am sorry

[apstguy]

Another noobie trying to take out someone else. Did we mention 1FastC10 is our resident smart ass? The noobie obviously didn't read the rules.

[rogf4]

OK guys I am not to big of a man to say I am sorry. This is not who I am. I do not know what came over me I would like to say I am sorry to the whole board for carring on this way. I am new to this board but I like it very much I have got alot of info here and helped a few as well I hope.
Thanks
Roger

[apstguy]

Good! I like you better now. Just choose your fights here as they can end up getting you in trouble. Usually fights on here are far between, but end up becoming flaming wars with people taking sides and drawing lines.

[bigblock73]

That is cool of you Roger..takes a man to apologize, something more of us board members should do at times.

Now lets talk trucks.