hitch bolts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71chevylongbed · 03-15-2004, 12:48 AM

what kind and size of bolts should i use to bolt on my new hitch?

Longhorn Man · 03-15-2004, 12:51 AM

Grade 5, stailess with lock washers. I double nut mine, but I am kinda anal about hitches and hate the fact that anyone can tow anything with what ever they drive. (How often do you see ppl overloading there S-10 or what ever with a heavy ass load hooked to a rusty step bumper?

)

71chevylongbed · 03-15-2004, 01:02 AM

i'm going to be welding it on too. wouldn't grade 8 bolts be better? i just dont want it to come off when i have my horse in the trailer behind it.

Longhorn Man · 03-15-2004, 01:28 AM

Grade 8 has a great clamping ability, but its shear strenght is not very good.
Basicly, it is brittle if given side to side loads and can shatter.
OI would not weld on that thing either, the hitch companies warn against any welding on there products.

71chevylongbed · 03-16-2004, 12:53 AM

i didnt buy that hitch i made it. where can i get those bolts at? would NAPA have them?

Longhorn Man · 03-16-2004, 08:17 AM

Yup, NAPA is who stocks our bolt bins.
I would go with the largest diameter that'll fit in the hole.

Putter · 03-16-2004, 11:17 AM

You made that one? Looks almost factory fresh.

**kwmech** · 03-16-2004, 11:39 AM

The hitch bolts are usually 1/2'' coarse and grade 5. Don't forget the flat and lock washers

71chevylongbed · 03-17-2004, 02:18 AM

yeah i made that hitch at school. only cost me $10. i only had to pay for the tube i used for the cross member the rest was scrap and we can use that for free. i welded it to the frame but i also wanted to put a couple bolts in each side just for a little extra strength not that it needs any. so i should be alright with 1/2 grade 5 bolts.

Longhorn Man · 03-17-2004, 08:19 AM

YEah, 1/2 inch should be fine. I actually hink that's what was on mine.

03-15-2004, 12:48 AM	#1
71chevylongbed Got Horsepower? Join Date: Sep 2003 Location: IDAHO Posts: 406	hitch bolts what kind and size of bolts should i use to bolt on my new hitch? Attached Images __________________ 2001 Dodge 2500 Cummins, 4 inch lift, 35" Toyo MT's on Ultra wheels, P-Pump Conversion, AFE intake, Fass, 5 inch exhaust, Pyro,Boost,and Fuel pressure guages, and a whole bunch of other stuff "The Money Pit" SOLD-71 Chevy C10 long bed- 2/4 drop-- 350,th400, Edelbrock performer RPM intake,Edelbrock 600 CFM carb,Crower 240 cam,port and polish,Dynomax headers,HEI ignition,dual 2.5 inch exhaust with Flowmaster 50 series mufflers

03-15-2004, 01:02 AM	#3
71chevylongbed Got Horsepower? Join Date: Sep 2003 Location: IDAHO Posts: 406	i'm going to be welding it on too. wouldn't grade 8 bolts be better? i just dont want it to come off when i have my horse in the trailer behind it. __________________ 2001 Dodge 2500 Cummins, 4 inch lift, 35" Toyo MT's on Ultra wheels, P-Pump Conversion, AFE intake, Fass, 5 inch exhaust, Pyro,Boost,and Fuel pressure guages, and a whole bunch of other stuff "The Money Pit" SOLD-71 Chevy C10 long bed- 2/4 drop-- 350,th400, Edelbrock performer RPM intake,Edelbrock 600 CFM carb,Crower 240 cam,port and polish,Dynomax headers,HEI ignition,dual 2.5 inch exhaust with Flowmaster 50 series mufflers

03-16-2004, 12:53 AM	#5
71chevylongbed Got Horsepower? Join Date: Sep 2003 Location: IDAHO Posts: 406	i didnt buy that hitch i made it. where can i get those bolts at? would NAPA have them? __________________ 2001 Dodge 2500 Cummins, 4 inch lift, 35" Toyo MT's on Ultra wheels, P-Pump Conversion, AFE intake, Fass, 5 inch exhaust, Pyro,Boost,and Fuel pressure guages, and a whole bunch of other stuff "The Money Pit" SOLD-71 Chevy C10 long bed- 2/4 drop-- 350,th400, Edelbrock performer RPM intake,Edelbrock 600 CFM carb,Crower 240 cam,port and polish,Dynomax headers,HEI ignition,dual 2.5 inch exhaust with Flowmaster 50 series mufflers

03-16-2004, 11:17 AM	#7
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	You made that one? Looks almost factory fresh. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

03-17-2004, 02:18 AM	#9
71chevylongbed Got Horsepower? Join Date: Sep 2003 Location: IDAHO Posts: 406	yeah i made that hitch at school. only cost me $10. i only had to pay for the tube i used for the cross member the rest was scrap and we can use that for free. i welded it to the frame but i also wanted to put a couple bolts in each side just for a little extra strength not that it needs any. so i should be alright with 1/2 grade 5 bolts. __________________ 2001 Dodge 2500 Cummins, 4 inch lift, 35" Toyo MT's on Ultra wheels, P-Pump Conversion, AFE intake, Fass, 5 inch exhaust, Pyro,Boost,and Fuel pressure guages, and a whole bunch of other stuff "The Money Pit" SOLD-71 Chevy C10 long bed- 2/4 drop-- 350,th400, Edelbrock performer RPM intake,Edelbrock 600 CFM carb,Crower 240 cam,port and polish,Dynomax headers,HEI ignition,dual 2.5 inch exhaust with Flowmaster 50 series mufflers

03-15-2004, 12:51 AM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Grade 5, stailess with lock washers. I double nut mine, but I am kinda anal about hitches and hate the fact that anyone can tow anything with what ever they drive. (How often do you see ppl overloading there S-10 or what ever with a heavy ass load hooked to a rusty step bumper? )

03-15-2004, 01:28 AM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Grade 8 has a great clamping ability, but its shear strenght is not very good. Basicly, it is brittle if given side to side loads and can shatter. OI would not weld on that thing either, the hitch companies warn against any welding on there products.

03-16-2004, 08:17 AM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Yup, NAPA is who stocks our bolt bins. I would go with the largest diameter that'll fit in the hole.

03-16-2004, 11:39 AM	#8
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,487	The hitch bolts are usually 1/2'' coarse and grade 5. Don't forget the flat and lock washers

03-17-2004, 08:19 AM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	YEah, 1/2 inch should be fine. I actually hink that's what was on mine.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.