toolbox door screw sizes

[Ochre Ogre]

Could someone please advise what size the screws are supposed to be for the toolbox door hinges? I need to drill out and re-tap the holes in the door. Also is the fiberglass box just held in by sheet metal screws? if so what size?
Thank you

[Ochre Ogre]

ttt anyone???

[Ironhorse]

Can't help with the tool box door hinge screw size but the fiberglass box is also supported at the back of the box under the bed floor. Believe they are 1/4 x 20 Phillips head, about 3/4'' long thru the bed floor down into a double L bracket that uses the same type screws thru the back of the fiberglass box. The double L bracket also has a doubler plate for reinforcement.

Have pulled a couple tool box setups from parted trucks and that is what I found on all of them. Wish my '71 4x4 had the tool box setup but then it would have been more $$ to fix the rust and then a decent door and a good fiberglass box and a good set of hinges and a good L bracket and ........... sometimes seems never ending. Hope that helps some.