![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Nov 2009
Location: DFW,TX
Posts: 233
|
Truck is running hot and can't figure out why
So my 2000 Silverado is running hot, replaced radiator 8 months ago, replaced water pump today, replaced all heater and water hoses and still gets hot don't know why, checked oil and it's clean, not milky like signs of a blown head gasket, it will run about 10-15 minutes and it will get up to 260 temp. It has fan shroud and every thing stock and can't figure out what's going on
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Nov 2009
Location: DFW,TX
Posts: 233
|
Re: Truck is running hot and can't figure out why
It's blowing the water out through the water tank reservoir, thru the hose
|
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Sep 2015
Location: Sioux Falls, South Dakota
Posts: 702
|
Re: Truck is running hot and can't figure out why
Thermostat?
__________________
"Orange Crush" |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Nov 2009
Location: DFW,TX
Posts: 233
|
Re: Truck is running hot and can't figure out why
I've changed it out already
|
![]() |
![]() |
![]() |
#5 |
blood type; Retumbo
Join Date: Jan 2004
Location: next to my reloading bench
Posts: 10,269
|
Re: Truck is running hot and can't figure out why
what temp is the coolant actually? Is the gauge reading right? The stepper motor in the gauge could be off. A scan tool might be of some help
__________________
Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Aug 2015
Location: Starbase 4
Posts: 118
|
Re: Truck is running hot and can't figure out why
Pressure test the cooling system. Just because the oil is O.K. doesn't mean that the head gasket is O.K., only that it didn't blow into the oil system. Look for a cracked head or block.
What engine do you have? Early 4.8 had a porosity/crapulence issue with the Castech heads. Don't know if 5.3 uses same head. |
![]() |
![]() |
![]() |
Bookmarks |
|
|