Project: That's not very original 1970 C10

[Harrison.]

Thank you!

This is how far behind I am. This is the last thing I got done in 2015! Put extra bracing in the cab and started cutting out the rust. This is what went into the drivers side:


And this is what I cut out:





It became pretty obvious pretty quick that the aftermarket floors weren't going to fit correctly so I built my own. The middle section was fine (you'll see in the pics) but as soon as it started up the firewall it was completely wrong.




Moving onto the inner rockers:



And finally the floors themselves!


..and cab corners


Sorry for the lengthy and pic intensive posts, hope nobody minds!