69 292 w/400 trans ???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wahl4m · 07-08-2016, 11:15 PM

i m pulling the motor out of my "ryder " c-30 truck wanting to do a late Ls/vortec motor anyway what would my motor and trans and the dual rear axle be worth ?? there should be a thread somewhere ?? thanks mike

**68bowtie** · 07-09-2016, 06:37 PM

if the buyer can see/hear it run/drive I would think $4-500 for the eng/trans. if unknown condition prob 200 for the pair. prob could make more parting it out. not sure about the rear.

68panelman · 07-10-2016, 08:46 AM

I'd say $8-1000, the 292's are becoming highly sought after, and mated to a turbo 400 is a bit of a odd combo, but a great one.

qksilver · 09-08-2016, 06:48 AM

saw this post and have been looking forever for the passenger side mounting brackets for the engine of a 1967 292.
Yours are for a later model but would work until the get the correct ones. I could put my 67 back on the road.

I would need both sides, everything between the frame crossmember and the engine block. Pm me if you would be willing to sell and give m a fair price

Thanks,
Steve

07-08-2016, 11:15 PM	#1
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 921	69 292 w/400 trans ???? i m pulling the motor out of my "ryder " c-30 truck wanting to do a late Ls/vortec motor anyway what would my motor and trans and the dual rear axle be worth ?? there should be a thread somewhere ?? thanks mike

07-09-2016, 06:37 PM	#2
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,505	Re: 69 292 w/400 trans ???? if the buyer can see/hear it run/drive I would think $4-500 for the eng/trans. if unknown condition prob 200 for the pair. prob could make more parting it out. not sure about the rear. __________________ I live in California, but identify as a Texan "If a job's worth doing, it's worth doing well" Survivor "Lil’ Mint" (67 c10 40k mile light green original paint) Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

07-10-2016, 08:46 AM	#3
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,455	Re: 69 292 w/400 trans ???? I'd say $8-1000, the 292's are becoming highly sought after, and mated to a turbo 400 is a bit of a odd combo, but a great one.

09-08-2016, 06:48 AM	#4
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 69 292 w/400 trans ???? saw this post and have been looking forever for the passenger side mounting brackets for the engine of a 1967 292. Yours are for a later model but would work until the get the correct ones. I could put my 67 back on the road. I would need both sides, everything between the frame crossmember and the engine block. Pm me if you would be willing to sell and give m a fair price Thanks, Steve



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.