AL WTB: 1971-72 Rebuildable/recoverable bench seat - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**General23cmp** · 09-05-2016, 04:03 PM

Full foam, non folding style. Good springs, decent foam, and low rust. North Alabama area. Thanks.

**70STOVEBOLT** · 09-05-2016, 10:21 PM

Not in the North Alabama area but I have one. No cover, decent foam, could use a small patch on drivers side. The end springs have been replaced with the universal type due to the originals being broken. Frame is not rusty. If interested I will post pics. I am willing to ship.

**General23cmp** · 09-05-2016, 10:25 PM

I'd be willing to consider it if you have pictures. My concern is the ridiculous cost to ship.

**70STOVEBOLT** · 09-07-2016, 07:56 AM

Here are some pics. Lower right pic is the driver's side where the foam could use a patch. More to come...

**70STOVEBOLT** · 09-07-2016, 08:01 AM

More pics...

**70STOVEBOLT** · 09-07-2016, 08:05 AM

Last set. I don't know what shipping would cost. If you are interested get me your zip and I will see what the cost is.

Thanks,
Mark

**70STOVEBOLT** · 09-07-2016, 02:27 PM

Quote:

Originally Posted by General23cmp

35613 zip. I may have found one locally. He is sending pictures as well. That is a good looking frame and not bad foam either.

Do you also have the sliding rails and screws to attach top to bottom?

I do have the sliders, not sure what year they are for. i will check on shipping and let you know.

**CUSTOM/10** · 09-07-2016, 02:51 PM

The seat brackets ( Slides ) Need to match the seat year or they will not fit correctly, I just went through this. There are 67-68, 69-70 and 71-72 brackets. I don't believe there was a full foam seat offered in 67-68, but I could be wrong. So you need to know the yr of the seat and get the brackets that match.

Gary

**70STOVEBOLT** · 09-07-2016, 03:58 PM

The sliders were bolted to the seat so I know they are correct for the seat. They must be 71-72 sliders then.

**General23cmp** · 09-07-2016, 08:23 PM

Quote:

Originally Posted by CUSTOM/10

The seat brackets ( Slides ) Need to match the seat year or they will not fit correctly, I just went through this. There are 67-68, 69-70 and 71-72 brackets. I don't believe there was a full foam seat offered in 67-68, but I could be wrong. So you need to know the yr of the seat and get the brackets that match.

Gary

Yes. I need 71-72 seat and 71-72 rails. I have a 68 full foam bottom, I'm pretty sure. Back isn't full foam.

**70STOVEBOLT** · 09-08-2016, 11:33 AM

[QUOTE=General23cmp;7706339]35613 zip. I may have found one locally. He is sending pictures as well. That is a good looking frame and not bad foam either.

Shipping is $115.00 via freight truck. This is the least expensive option I can find. Shows to be a 2-day trip. I would like to get $125.00 for the seat, so $240.00 shipped.

**lolife99** · 09-08-2016, 11:38 AM

Quote:

Originally Posted by ck5566

These seat sliders came out of a ONE Owner Truck. Based on collected info on them from our members that have been Dismantling Trucks for the past 25-35 years I'll stick with there info.

Thats fine.

I've been doing this for 30+ years also.
Anyone that wants to learn about the differences in seat brackets can look at this thread.
http://67-72chevytrucks.com/vboard/s....php?p=5374820

Have a nice day,...

09-05-2016, 04:03 PM	#1
General23cmp Senior Member Join Date: Mar 2016 Location: Athens, AL Posts: 360	WTB: 1971-72 Rebuildable/recoverable bench seat Full foam, non folding style. Good springs, decent foam, and low rust. North Alabama area. Thanks.

09-05-2016, 10:21 PM	#2
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: WTB: 1971-72 Rebuildable/recoverable bench seat Not in the North Alabama area but I have one. No cover, decent foam, could use a small patch on drivers side. The end springs have been replaced with the universal type due to the originals being broken. Frame is not rusty. If interested I will post pics. I am willing to ship. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear Last edited by 70STOVEBOLT; 09-07-2016 at 07:58 AM. Reason: spelling corrections

09-05-2016, 10:25 PM	#3
General23cmp Senior Member Join Date: Mar 2016 Location: Athens, AL Posts: 360	Re: WTB: 1971-72 Rebuildable/recoverable bench seat I'd be willing to consider it if you have pictures. My concern is the ridiculous cost to ship.

09-07-2016, 07:56 AM	#4
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: WTB: 1971-72 Rebuildable/recoverable bench seat Here are some pics. Lower right pic is the driver's side where the foam could use a patch. More to come... Attached Images __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-07-2016, 08:01 AM	#5
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: WTB: 1971-72 Rebuildable/recoverable bench seat More pics... Attached Images __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-07-2016, 08:05 AM	#6
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: WTB: 1971-72 Rebuildable/recoverable bench seat Last set. I don't know what shipping would cost. If you are interested get me your zip and I will see what the cost is. Thanks, Mark Attached Images __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-07-2016, 02:51 PM	#8
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,854	Re: WTB: 1971-72 Rebuildable/recoverable bench seat The seat brackets ( Slides ) Need to match the seat year or they will not fit correctly, I just went through this. There are 67-68, 69-70 and 71-72 brackets. I don't believe there was a full foam seat offered in 67-68, but I could be wrong. So you need to know the yr of the seat and get the brackets that match. Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

09-07-2016, 03:58 PM	#9
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: WTB: 1971-72 Rebuildable/recoverable bench seat The sliders were bolted to the seat so I know they are correct for the seat. They must be 71-72 sliders then. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-08-2016, 11:33 AM	#11
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: WTB: 1971-72 Rebuildable/recoverable bench seat [QUOTE=General23cmp;7706339]35613 zip. I may have found one locally. He is sending pictures as well. That is a good looking frame and not bad foam either. Shipping is $115.00 via freight truck. This is the least expensive option I can find. Shows to be a 2-day trip. I would like to get $125.00 for the seat, so $240.00 shipped. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.