Custom Rear Bumper Tail Lights Needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

testerdahl · 09-19-2016, 08:24 PM

Alright guys, I have an odd issue with my '62. Turns out grandpa put an aftermarket rear bumper on the truck. Looking closer at it, there are 4 lights (2 on each side) with the openings being different sizes. A quick tape measure shows the big one is 3.5" and the other is 2" if memory serves right.

I have red and black wiring going to the rear bumper. Unfortunately, the current lights don't have screw holes. And it is a bulb which means the flat covers don't work. I'm starting to look at Semi lights as an option, but I have no idea if they will work. Here is one of the Semi ideas (http://www.raneystruckparts.com/2-ro...-marker-light/). I'm thinking I could make all 4 lights the same size.

Here is a picture showing the bumper. I can take a closer pic, but I thought this would get the conversation going.

Anyone have any ideas? I've been all over LMC, Classic Chevy and Napa. I can't figure out what I want or can do.

jtrichard · 09-19-2016, 08:30 PM

Pull one of the lights out and get close up pics of light and what ever kind of mounting that is in the bumper....

Look at post #45 here

http://67-72chevytrucks.com/vboard/s...=561195&page=2

AcampoDave · 09-19-2016, 08:35 PM

If I were going to tackle that one, I would find a sealed light with a diameter that inserted into the original holes. Barring that option, I would find one that is a tad larger and secure it behind the opening with a homemade bracket of some type. I would also use an l.e.d bulb so I wouldn't have to mess with it again for a long time.

testerdahl · 09-19-2016, 08:38 PM

Here are some close-up photos.

testerdahl · 09-19-2016, 08:41 PM

Quote:

Originally Posted by jtrichard

Pull one of the lights out and get close up pics of light and what ever kind of mounting that is in the bumper....

Look at post #45 here

http://67-72chevytrucks.com/vboard/s...=561195&page=2

Photos posted.

Sweet. A Barden bumper then. Thanks for posting that link. Interesting to see how those lights are in it.

testerdahl · 09-19-2016, 08:41 PM

I should add my lights aren't flat like his. They are more like a tear drop.

testerdahl · 09-19-2016, 08:44 PM

Quote:

Originally Posted by AcampoDave

If I were going to tackle that one, I would find a sealed light with a diameter that inserted into the original holes. Barring that option, I would find one that is a tad larger and secure it behind the opening with a homemade bracket of some type. I would also use an l.e.d bulb so I wouldn't have to mess with it again for a long time.

I'm also trying to find a mid 80s to early 90s S-10 with the 5-speed to do the swap with the 4-speed. If I do that, then I'll also get the neutral switch to do a reverse. With the strong possibility of my kids driving this truck someday, I'd also like to have a reverse light. This only further adds to the complexity. SMH...

jtrichard · 09-19-2016, 09:35 PM

IF you could get the big holes cut out to 4-1/2" nice and round I would go to a light like this http://www.ebay.com/itm/2-RED-ROUND-...ZTgqCb&vxp=mtr
And 2-3/4" for backup lights
http://shop.poisonspyder.com/2-1-2-L.../41-04-300.htm

testerdahl · 09-19-2016, 09:38 PM

Quote:

Originally Posted by jtrichard

IF you could get the big holes cut out to 4-1/2" nice and round I would go to a light like this http://www.ebay.com/itm/2-RED-ROUND-...ZTgqCb&vxp=mtr

I'm starting to wonder if it even matters if the whole light doesn't shine through. I mean I think I have enough room to put a 4 inch LED in the housing. The viewable light would be less, but would that really matter?

testerdahl · 09-19-2016, 09:40 PM

I also wonder if I could just make these RV lights work. I would just need some way to mount them to the inside of the bumper. Hmm...

https://www.superbrightleds.com/more...onnector/2921/

64shortbox · 09-20-2016, 09:13 PM

How about something like this - looks like a mounting bracket on the back of the housing - a little larger than you are looking for but it just might work and for $3.80 from Home Depot not a lot of cash out of pocket to experiment with.

http://www.homedepot.com/p/Blazer-In...55UW/202498003

Then there's this one too - though you would have to open up the bumper hole to 4 1/4" but it is a surface mount and $3.98 out of pocket. Also from Home Depot.

http://www.homedepot.com/p/Blazer-In...KcMHgg&cj=true

testerdahl · 09-20-2016, 09:21 PM

Quote:

Originally Posted by 64shortbox

How about something like this - looks like a mounting bracket on the back of the housing - a little larger than you are looking for but it just might work and for $3.80 from Home Depot not a lot of cash out of pocket to experiment with.

http://www.homedepot.com/p/Blazer-In...55UW/202498003

Then there's this one too - though you would have to open up the bumper hole to 4 1/4" but it is a surface mount and $3.98 out of pocket. Also from Home Depot.

http://www.homedepot.com/p/Blazer-In...KcMHgg&cj=true

Hmm... Those are great ideas. Thanks for finding them. Honestly, I wouldn't have even thought to look for Home Depot RV lights. I'm going to order up one and see how it fits. Thanks!

64shortbox · 09-20-2016, 09:35 PM

I found one more for you 3 3/4" round with 2 mounting studs but they're $17.00 a pair off eBay with free shipping - still not exactly what you're looking for but the more options you have the better - I know - still 1/4" larger than your opening but I thought I would throw it out there for you to check out anyway.

http://www.ebay.com/itm/Round-Red-Li...xSXb5u&vxp=mtr

testerdahl · 09-20-2016, 09:46 PM

Quote:

Originally Posted by 64shortbox

I found one more for you 3 3/4" round with 2 mounting studs but they're $17.00 a pair off eBay with free shipping - still not exactly what you're looking for but the more options you have the better - I know - still 1/4" larger than your opening but I thought I would throw it out there for you to check out anyway.

http://www.ebay.com/itm/Round-Red-Li...xSXb5u&vxp=mtr

Thanks for finding these? I think I like the Home Depot ones better. I just wonder if I install 4 of them if it will work with the light illuminating behind the opening especially for the smaller ones.

64shortbox · 09-20-2016, 10:05 PM

Thanks for finding these? I think I like the Home Depot ones better. I just wonder if I install 4 of them if it will work with the light illuminating behind the opening especially for the smaller ones.

I also like the 3 7/8" lights. I think they would be a better fit for your truck & bumper. I wouldn't think there would be a problem with them sitting behind the holes with giving out enough light - though there might be some red illumination from under the bumper at night - just not sure about that though.

09-19-2016, 08:24 PM	#1
testerdahl Registered User Join Date: Apr 2016 Location: Gering Posts: 112	Custom Rear Bumper Tail Lights Needed Alright guys, I have an odd issue with my '62. Turns out grandpa put an aftermarket rear bumper on the truck. Looking closer at it, there are 4 lights (2 on each side) with the openings being different sizes. A quick tape measure shows the big one is 3.5" and the other is 2" if memory serves right. I have red and black wiring going to the rear bumper. Unfortunately, the current lights don't have screw holes. And it is a bulb which means the flat covers don't work. I'm starting to look at Semi lights as an option, but I have no idea if they will work. Here is one of the Semi ideas (http://www.raneystruckparts.com/2-ro...-marker-light/). I'm thinking I could make all 4 lights the same size. Here is a picture showing the bumper. I can take a closer pic, but I thought this would get the conversation going. Anyone have any ideas? I've been all over LMC, Classic Chevy and Napa. I can't figure out what I want or can do. Attached Images

09-19-2016, 08:30 PM	#2
jtrichard Registered User Join Date: Jun 2013 Location: joshua tree ca. Posts: 1,484	Re: Custom Rear Bumper Tail Lights Needed Pull one of the lights out and get close up pics of light and what ever kind of mounting that is in the bumper.... Look at post #45 here http://67-72chevytrucks.com/vboard/s...=561195&page=2 Last edited by jtrichard; 09-19-2016 at 08:35 PM.

09-19-2016, 08:35 PM	#3
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,733	Re: Custom Rear Bumper Tail Lights Needed If I were going to tackle that one, I would find a sealed light with a diameter that inserted into the original holes. Barring that option, I would find one that is a tad larger and secure it behind the opening with a homemade bracket of some type. I would also use an l.e.d bulb so I wouldn't have to mess with it again for a long time.

09-19-2016, 08:41 PM	#6
testerdahl Registered User Join Date: Apr 2016 Location: Gering Posts: 112	Re: Custom Rear Bumper Tail Lights Needed I should add my lights aren't flat like his. They are more like a tear drop.

09-19-2016, 09:35 PM	#8
jtrichard Registered User Join Date: Jun 2013 Location: joshua tree ca. Posts: 1,484	Re: Custom Rear Bumper Tail Lights Needed IF you could get the big holes cut out to 4-1/2" nice and round I would go to a light like this http://www.ebay.com/itm/2-RED-ROUND-...ZTgqCb&vxp=mtr And 2-3/4" for backup lights http://shop.poisonspyder.com/2-1-2-L.../41-04-300.htm Last edited by jtrichard; 09-19-2016 at 09:42 PM.

09-19-2016, 08:38 PM	#4
testerdahl Registered User Join Date: Apr 2016 Location: Gering Posts: 112	Re: Custom Rear Bumper Tail Lights Needed Here are some close-up photos. Attached Images

09-19-2016, 09:40 PM	#10
testerdahl Registered User Join Date: Apr 2016 Location: Gering Posts: 112	Re: Custom Rear Bumper Tail Lights Needed I also wonder if I could just make these RV lights work. I would just need some way to mount them to the inside of the bumper. Hmm... https://www.superbrightleds.com/more...onnector/2921/

09-20-2016, 09:13 PM	#11
64shortbox Registered User Join Date: Jan 2011 Location: Tulare, CA Posts: 733	Re: Custom Rear Bumper Tail Lights Needed How about something like this - looks like a mounting bracket on the back of the housing - a little larger than you are looking for but it just might work and for $3.80 from Home Depot not a lot of cash out of pocket to experiment with. http://www.homedepot.com/p/Blazer-In...55UW/202498003 Then there's this one too - though you would have to open up the bumper hole to 4 1/4" but it is a surface mount and $3.98 out of pocket. Also from Home Depot. http://www.homedepot.com/p/Blazer-In...KcMHgg&cj=true

09-20-2016, 09:35 PM	#13
64shortbox Registered User Join Date: Jan 2011 Location: Tulare, CA Posts: 733	Re: Custom Rear Bumper Tail Lights Needed I found one more for you 3 3/4" round with 2 mounting studs but they're $17.00 a pair off eBay with free shipping - still not exactly what you're looking for but the more options you have the better - I know - still 1/4" larger than your opening but I thought I would throw it out there for you to check out anyway. http://www.ebay.com/itm/Round-Red-Li...xSXb5u&vxp=mtr

09-20-2016, 10:05 PM	#15
64shortbox Registered User Join Date: Jan 2011 Location: Tulare, CA Posts: 733	Re: Custom Rear Bumper Tail Lights Needed Thanks for finding these? I think I like the Home Depot ones better. I just wonder if I install 4 of them if it will work with the light illuminating behind the opening especially for the smaller ones. I also like the 3 7/8" lights. I think they would be a better fit for your truck & bumper. I wouldn't think there would be a problem with them sitting behind the holes with giving out enough light - though there might be some red illumination from under the bumper at night - just not sure about that though.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.