TX 292 clifford headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

obijuan · 01-25-2016, 10:25 PM

Set of clifford headers for sale. I have everything except the gasket for the head. 200 local or 250 shipped. Pm please.

BCOWANWHEELS · 01-26-2016, 01:18 AM

Fyi, these will also work on 250,s

Tork? · 01-26-2016, 01:17 PM

Do you have any pictures of how low they hang? In your opinion would these hang too low with air ride?

obijuan · 01-26-2016, 02:59 PM

Only reason I am not using them is because they are too wide for my jeep frame. Here's a pic of them hung on the motor. Hope that helps.

obijuan · 01-31-2016, 12:17 AM

Bump

obijuan · 02-05-2016, 11:27 PM

Trade for h072 locker

**tll74** · 02-06-2016, 01:00 AM

What size are the tubes and do you have the collector flanges?

obijuan · 02-07-2016, 01:55 PM

Tubes measure 1.63" OD and yes I have everything but the gasket for the head.

**tll74** · 02-12-2016, 02:45 AM

thanks for the reply. I'm building a blower motor for a 64 Nova with a straight axle. I think they would fit fine. I probably have a original Detroit locker (no spin). I'll check and get back to you. Thanks, Tom

obijuan · 02-15-2016, 09:51 PM

bump

**tll74** · 02-21-2016, 05:04 PM

Quote:

Originally Posted by obijuan

Trade for h072 locker

I have the HO72 locker. I'll trade you. LMK Thanks, Tom

obijuan · 02-21-2016, 06:42 PM

cool. im down. pm me some pics of the teeth and general condition. thanks.

obijuan · 04-10-2016, 01:49 PM

Still available

obijuan · 05-15-2016, 12:46 PM

Come get your great price on headers.

obijuan · 06-05-2016, 07:20 PM

Someone here in the lower 48 needs headers.

**Grumpy old man** · 06-06-2016, 09:23 AM

I'm interested post a couple pics

obijuan · 06-06-2016, 08:45 PM

Quote:

Originally Posted by Grumpy old man

I'm interested post a couple pics

Intake has sold
These have never been tightened down.

**Grumpy old man** · 06-07-2016, 05:46 AM

Looking from the pictures it seems these are better suited for an automatic ,when mounted is there sufficient clearance for a stock manual clutch linkage ? They look different from the 250/292 dual truck header ?

obijuan · 06-07-2016, 06:34 AM

No difference. Same 450 dollar headers. 52-0768C from clifford.

obijuan · 06-20-2016, 08:18 PM

Bump

downeyballz · 09-30-2016, 07:25 AM

are these headers still kicking around? im looking for a set to put on my 292 powered k10 over the winter.

if you still have them shoot me a text at 860-857-4438

01-25-2016, 10:25 PM	#1
obijuan Registered User Join Date: Jun 2012 Location: cibolo tx Posts: 1,033	292 clifford headers Set of clifford headers for sale. I have everything except the gasket for the head. 200 local or 250 shipped. Pm please. Last edited by obijuan; 06-20-2016 at 08:18 PM.

01-26-2016, 01:18 AM	#2
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: 292 clifford headers Fyi, these will also work on 250,s __________________ I BELIEVE IN JOHN 3:16

01-26-2016, 01:17 PM	#3
Tork? Registered User Join Date: May 2013 Location: Chicago, IL Posts: 217	Re: 292 clifford headers Do you have any pictures of how low they hang? In your opinion would these hang too low with air ride?

01-26-2016, 02:59 PM	#4
obijuan Registered User Join Date: Jun 2012 Location: cibolo tx Posts: 1,033	Re: 292 clifford headers Only reason I am not using them is because they are too wide for my jeep frame. Here's a pic of them hung on the motor. Hope that helps.

01-31-2016, 12:17 AM	#5
obijuan Registered User Join Date: Jun 2012 Location: cibolo tx Posts: 1,033	Re: 292 clifford headers Bump

02-05-2016, 11:27 PM	#6
obijuan Registered User Join Date: Jun 2012 Location: cibolo tx Posts: 1,033	Re: 292 clifford headers Trade for h072 locker

02-06-2016, 01:00 AM	#7
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: 292 clifford headers What size are the tubes and do you have the collector flanges? __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

02-07-2016, 01:55 PM	#8
obijuan Registered User Join Date: Jun 2012 Location: cibolo tx Posts: 1,033	Re: 292 clifford headers Tubes measure 1.63" OD and yes I have everything but the gasket for the head.

02-12-2016, 02:45 AM	#9
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: 292 clifford headers thanks for the reply. I'm building a blower motor for a 64 Nova with a straight axle. I think they would fit fine. I probably have a original Detroit locker (no spin). I'll check and get back to you. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

02-15-2016, 09:51 PM	#10
obijuan Registered User Join Date: Jun 2012 Location: cibolo tx Posts: 1,033	Re: 292 clifford headers bump

02-21-2016, 06:42 PM	#12
obijuan Registered User Join Date: Jun 2012 Location: cibolo tx Posts: 1,033	Re: 292 clifford headers cool. im down. pm me some pics of the teeth and general condition. thanks.

04-10-2016, 01:49 PM	#13
obijuan Registered User Join Date: Jun 2012 Location: cibolo tx Posts: 1,033	Re: 292 clifford headers Still available

05-15-2016, 12:46 PM	#14
obijuan Registered User Join Date: Jun 2012 Location: cibolo tx Posts: 1,033	Re: 292 clifford headers Come get your great price on headers.

06-05-2016, 07:20 PM	#15
obijuan Registered User Join Date: Jun 2012 Location: cibolo tx Posts: 1,033	Re: 292 clifford headers Someone here in the lower 48 needs headers.

06-06-2016, 09:23 AM	#16
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: 292 clifford headers I'm interested post a couple pics __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop



Register or Log In To remove these advertisements.

06-07-2016, 05:46 AM	#18
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: 292 clifford headers Looking from the pictures it seems these are better suited for an automatic ,when mounted is there sufficient clearance for a stock manual clutch linkage ? They look different from the 250/292 dual truck header ? __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

06-07-2016, 06:34 AM	#19
obijuan Registered User Join Date: Jun 2012 Location: cibolo tx Posts: 1,033	Re: 292 clifford headers No difference. Same 450 dollar headers. 52-0768C from clifford.

06-20-2016, 08:18 PM	#20
obijuan Registered User Join Date: Jun 2012 Location: cibolo tx Posts: 1,033	Re: 292 clifford headers Bump

09-30-2016, 07:25 AM	#21
downeyballz Registered User Join Date: Jan 2016 Location: nl connecticut Posts: 22	Re: 292 clifford headers are these headers still kicking around? im looking for a set to put on my 292 powered k10 over the winter. if you still have them shoot me a text at 860-857-4438

Register or Log In To remove these advertisements.