homemade led tails DONE! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Robznob11 · 11-20-2015, 07:47 AM

Felser .... Only one I know

hammersmith · 11-20-2015, 08:25 AM

Nice job . looks awesome. For people like me without that kinda talent using duct tape to line the housing helps brighten things up a bit .

Robznob11 · 11-20-2015, 08:29 AM

Duck tape or aluminum foil tape.

Andy4639 · 11-20-2015, 08:46 AM

Quote:

Originally Posted by Robznob11

Hey Andy these are a pic of the ones I sent to Esoxman308 today. These are the new ends I found. I think they are like your old ones.

Yepper's that's them sir! That will be a nice added feature to your product for sure! I'm loving mine.

Elliot949 · 11-20-2015, 06:48 PM

Quote:

Originally Posted by jondancer

Where do you get a smoother cleaner red lens for the taillights? The stock lens is split in the middle , I think a solid lend would look better

Here are my Fesler lights...

Robznob11 · 11-20-2015, 06:52 PM

Just looking at those and your pattern I think they are the same as stock tail light sizes.

Elliot949 · 11-20-2015, 07:07 PM

Quote:

Originally Posted by Robznob11

Just looking at those and your pattern I think they are the same as stock tail light sizes.

Like I said they looked close but I just didn't have stock ones to compare it to...

Andy4639 · 11-20-2015, 09:11 PM

Quote:

Originally Posted by Elliot949

Like I said they looked close but I just didn't have stock ones to compare it to...

Do they use the factory housing on the truck?
Like these. If so they should work fine.

Robznob11 · 12-08-2015, 03:39 PM

I have and add in classifieds now....

Elliot949 · 12-08-2015, 05:22 PM

Quote:

Originally Posted by Robznob11

I have and add in classifieds now....

Still waiting on my Backup lights

Robznob11 · 12-08-2015, 05:27 PM

Yes sir I sent you a pm. I'm waiting on the super flux leds to come. When I ordered they sent all red and forgot the white. Sorry but I'll get them asap

Elliot949 · 12-08-2015, 05:34 PM

Quote:

Originally Posted by Robznob11

Yes sir I sent you a pm. I'm waiting on the super flux leds to come. When I ordered they sent all red and forgot the white. Sorry but I'll get them asap

Kewl... 5hanks

snipescastle2 · 12-09-2015, 09:10 AM

Dang!!!

Those fesler's are real Purdy!!!! But Dayum, are they pricey........
Ben

kehstr · 12-09-2015, 06:18 PM

can you post pictures of you schematics and the connectors you used to do the conversion

Robznob11 · 12-09-2015, 06:20 PM

Search homemade ledtails sneak peak .directions are there. 1157 and 1156 pigtails for connectors.

Robznob11 · 01-13-2016, 11:36 PM

These are the upgrade set , took two days to make . By far the brightest set I have made.

flashed · 01-13-2016, 11:40 PM

Those look great ,will have to wait a while on those .But how much just for reference ?

Robznob11 · 01-13-2016, 11:43 PM

There's a set in classified about 50$ more than the regular ones. The leds are more expensive and they take a lot longer to make...

aboesec10 · 01-14-2016, 08:21 AM

what does a set of these bad boys go for? I'm very interested.

Robznob11 · 01-14-2016, 08:30 AM

I have a set in the 67-72 parts classified now.

Robznob11 · 02-03-2016, 01:58 AM

Here is big reds on his truck. They are very very bright. 30000 mcd each led x 54 =@5400 + lumens each pannel. A standard 1157=404 lumens... The white ones I just got are 50000mcd each 32 per reverse lights =@4000+ lumens each. Hope to have pics of them tomorrow... I hope he will chime in ,but I believe his words were that the pics don't do justice to how bright they really are

Robznob11 · 02-07-2016, 12:32 AM

Ok guys I got some questions of what these lights look like on the back. Well I put a rubber backer on them to protect them from shorting but I snapped a photo before I finished these so all could see. I also shot this short video to show off the new 30000mcd red and 50000 mcd white leds I got. These are for a fellow board member.Check out this video on YouTube:

http://youtu.be/cIqqhprnXdE

Andy4639 · 02-07-2016, 08:49 AM

I wished I had waited on these Rob! You would change them out would you?

clemsonteg · 10-04-2016, 08:39 PM

Quote:

Originally Posted by Robznob11

Here is big reds on his truck. They are very very bright. 30000 mcd each led x 54 =@5400 + lumens each pannel. A standard 1157=404 lumens... The white ones I just got are 50000mcd each 32 per reverse lights =@4000+ lumens each. Hope to have pics of them tomorrow... I hope he will chime in ,but I believe his words were that the pics don't do justice to how bright they really are

Where did you find the 30,000mcd red and 50,000mcd white? 15,000 is about as high as I can find.

11-20-2015, 07:47 AM	#26
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: homemade led tails DONE! Felser .... Only one I know __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

11-20-2015, 08:25 AM	#27
hammersmith Registered User Join Date: Nov 2014 Location: innisfil ont. Posts: 70	Re: homemade led tails DONE! Nice job . looks awesome. For people like me without that kinda talent using duct tape to line the housing helps brighten things up a bit . Attached Images

11-20-2015, 08:29 AM	#28
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: homemade led tails DONE! Duck tape or aluminum foil tape. __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

11-20-2015, 06:52 PM	#31
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: homemade led tails DONE! Just looking at those and your pattern I think they are the same as stock tail light sizes. __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

12-08-2015, 03:39 PM	#34
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: homemade led tails DONE! I have and add in classifieds now.... __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

12-08-2015, 05:27 PM	#36
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: homemade led tails DONE! Yes sir I sent you a pm. I'm waiting on the super flux leds to come. When I ordered they sent all red and forgot the white. Sorry but I'll get them asap __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

12-09-2015, 09:10 AM	#38
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: homemade led tails DONE! Dang!!! Those fesler's are real Purdy!!!! But Dayum, are they pricey........ Ben

12-09-2015, 06:18 PM	#39
kehstr Registered User Join Date: Mar 2015 Location: Utah Posts: 750	Re: homemade led tails DONE! can you post pictures of you schematics and the connectors you used to do the conversion

12-09-2015, 06:20 PM	#40
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: homemade led tails DONE! Search homemade ledtails sneak peak .directions are there. 1157 and 1156 pigtails for connectors. __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

01-13-2016, 11:36 PM	#41
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: homemade led tails DONE! These are the upgrade set , took two days to make . By far the brightest set I have made. Attached Images __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

01-13-2016, 11:40 PM	#42
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: homemade led tails DONE! Those look great ,will have to wait a while on those .But how much just for reference ?

01-13-2016, 11:43 PM	#43
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: homemade led tails DONE! There's a set in classified about 50$ more than the regular ones. The leds are more expensive and they take a lot longer to make... __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

01-14-2016, 08:21 AM	#44
aboesec10 Registered User Join Date: Jan 2010 Location: Katy Texas Posts: 501	Re: homemade led tails DONE! what does a set of these bad boys go for? I'm very interested.

01-14-2016, 08:30 AM	#45
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: homemade led tails DONE! I have a set in the 67-72 parts classified now. __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

02-03-2016, 01:58 AM	#46
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: homemade led tails DONE! Here is big reds on his truck. They are very very bright. 30000 mcd each led x 54 =@5400 + lumens each pannel. A standard 1157=404 lumens... The white ones I just got are 50000mcd each 32 per reverse lights =@4000+ lumens each. Hope to have pics of them tomorrow... I hope he will chime in ,but I believe his words were that the pics don't do justice to how bright they really are Attached Images __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS



Register or Log In To remove these advertisements.

02-07-2016, 12:32 AM	#47
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: homemade led tails DONE! Ok guys I got some questions of what these lights look like on the back. Well I put a rubber backer on them to protect them from shorting but I snapped a photo before I finished these so all could see. I also shot this short video to show off the new 30000mcd red and 50000 mcd white leds I got. These are for a fellow board member.Check out this video on YouTube: http://youtu.be/cIqqhprnXdE Attached Images __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

02-07-2016, 08:49 AM	#48
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: homemade led tails DONE! I wished I had waited on these Rob! You would change them out would you? __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

Register or Log In To remove these advertisements.