4.8 4l60e vs 4 or 5spd

[elf w/capital T]

i cut out my floor and put a high hump.

made my own crossmember to support the nv3500, and it came out of a 92-93 Silverado.

hydraulic clutch is nice and smooth

had to buy special pilot pushing for input shaft but worth the hassle, can look up part number if needed, and flywheel and clutch were for a 4.8l motor

[JPsChevy]

Originally Posted by elf w/capital T

i cut out my floor and put a high hump.

made my own crossmember to support the nv3500, and it came out of a 92-93 Silverado.

hydraulic clutch is nice and smooth

had to buy special pilot pushing for input shaft but worth the hassle, can look up part number if needed, and flywheel and clutch were for a 4.8l motor

I'm going to try and run the low hump, I bought complete parts 06 with nv3500, if your running the new style nv3500 can you show me how you did your clutch to push the master cyl.