|
|
|
10-17-2016, 04:42 PM
|
#1 |
|
Registered User
Join Date: Nov 2001
Location: Springfield, MO
Posts: 2,946
|
Re: Working....64 SS
That kit was a neat concept. It wouldn't work because it was for R12 and the fittings are different or what? I was gonna add one to mine if it all would fit.
__________________
Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!" |
|
|
|
10-19-2016, 07:40 PM
|
#2 | |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Working....64 SS
Quote:
If I had seen the kit before I had the lines made up it would have worked. I should have put the R-12 fittings on the hoses instead of the 134 A fittings. I had the 134 A fittings installed on the hoses when made. The switch wouldn't work. The R-12 fitting is a screw fitting where the 134 A isn't. So to fix it I had the new drier drilled and tapped for the switch. Had it vacuumed & charged today. It's working great. I hid the lines behind the inner fender and the drier is up in the front of the fender behind the battery. 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
