Pics of inner fenders? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slammed67 · 03-22-2004, 11:24 AM

Does anyone have a picture of the driver's side inner fender (not installed)? Mine has a fairly large "dent/crease" back by where it bolts to the cab. I can't tell if it is supposed to be that way, or if mine is bent. It looks like it's there for shift linkage clearance, but I just want to make sure.

Thanks,

Jason

Bill72BB · 03-22-2004, 02:35 PM

Jason; Just looked under BB , it's a 72 Auto , my inner fender has no crease or indentation.

Slammed67 · 03-22-2004, 02:41 PM

Bill, thanks for checking. My description may have been a little vague. Here is a pic of mine (I was doing a little rust repair). Is the area outlined in red they way they look from the factory. I assume it is, but it just looks strange to me.

**Palf70Step** · 03-22-2004, 03:11 PM

Dereck here is my 70's before I painted it. It's original. Hopefully it tells you what you want

Here is after paint, but from bottom side

Hope these give you what you need. They all I have access to from work.

SWEET7T · 03-22-2004, 04:34 PM

My driver side inner has a piece punched (into the engine compartment) about the size of a pop can. It is toward the front, about even with the rag-joint.

Is that supposed to be there?

Benrs86 · 03-23-2004, 01:03 AM

i got one too sweet7t

03-22-2004, 11:24 AM	#1
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	Pics of inner fenders? Does anyone have a picture of the driver's side inner fender (not installed)? Mine has a fairly large "dent/crease" back by where it bolts to the cab. I can't tell if it is supposed to be that way, or if mine is bent. It looks like it's there for shift linkage clearance, but I just want to make sure. Thanks, Jason __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

03-22-2004, 02:35 PM	#2
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,980	Jason; Just looked under BB , it's a 72 Auto , my inner fender has no crease or indentation. __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

03-22-2004, 02:41 PM	#3
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	Bill, thanks for checking. My description may have been a little vague. Here is a pic of mine (I was doing a little rust repair). Is the area outlined in red they way they look from the factory. I assume it is, but it just looks strange to me. Attached Images __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

03-22-2004, 03:11 PM	#4
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,761	Dereck here is my 70's before I painted it. It's original. Hopefully it tells you what you want Here is after paint, but from bottom side Hope these give you what you need. They all I have access to from work. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 03-22-2004 at 06:19 PM.

03-22-2004, 04:34 PM	#5
SWEET7T Try spinnin 4 rear tars Join Date: Sep 2003 Location: Salt Lake City, Utah Posts: 757	My driver side inner has a piece punched (into the engine compartment) about the size of a pop can. It is toward the front, about even with the rag-joint. Is that supposed to be there? __________________ SWEET7T 1970 C10, 2wd, LB, 307/TH350/3.08. PS, PB

03-23-2004, 01:03 AM	#6
Benrs86 Registered User Join Date: Feb 2000 Location: Brandon, SD, USA Posts: 1,292	i got one too sweet7t __________________ Brandon, SD 69 GMC 1/2 ton 2wd wide long bed with wood 3 on the tree 350 engine 4 bolt main rv cam AIM = Alphray04



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.