The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-28-2016, 06:59 PM   #1
benbloom
Registered User
 
Join Date: Mar 2015
Location: san rafael california
Posts: 202
Help Identifying. Odd Part on my '68

Anyone recognize this part? Ive had 3 67-72s and never seen anything like it before. it looks to connect to the heads through little tubes on top of the engine, and the carb through a vacuum line. Is it a generator? the alternator is directly underneath.

Thanks!
Attached Images
  
benbloom is offline   Reply With Quote
Old 10-28-2016, 07:00 PM   #2
LongBox
Registered User
 
Join Date: Sep 2016
Location: Vancouver BC
Posts: 784
Re: Help Identifying. Odd Part on my '68

Looks like the air injection pump. It was required in some states. Shoots air into the hot exhaust to help burn up some pollutants.
__________________
Rick

-69 GMC 910 Long Box, 350
-98 Chev Silverado 1500, 350 Vortec 4L60e
-08 Mustang GT Convertible
LongBox is offline   Reply With Quote
Old 10-28-2016, 07:01 PM   #3
Grumpy old man
Senior Member
 
Grumpy old man's Avatar
 
Join Date: Dec 2013
Location: Gods country East,Tn
Posts: 8,545
Re: Help Identifying. Odd Part on my '68

Air pump for smog system
__________________

1967 Factory short bed - Old school
'71 - 350 / 4bolt / 487 heads / Edelbrock C3BX
Muncie M-22 4 speed / Hurst Comp plus
Factory 12 bolt posi 3.73 / 255-70-15
Smoothed firewall / Factory cowl induction
Power disc brakes / power steering / 3.5-5" drop
Grumpy old man is offline   Reply With Quote
Old 10-28-2016, 07:03 PM   #4
benbloom
Registered User
 
Join Date: Mar 2015
Location: san rafael california
Posts: 202
Re: Help Identifying. Odd Part on my '68

Wow they were already getting on our asses in 1968? Thats nuts.
So is this something i can remove easily? if i can block up the ports feeding into the heads and remove the pump?
benbloom is offline   Reply With Quote
Old 10-28-2016, 07:14 PM   #5
Stocker
20' Daredevil (Ret)
 
Stocker's Avatar
 
Join Date: May 2003
Location: Jefferson State
Posts: 13,722
Re: Help Identifying. Odd Part on my '68

Yeah, many (probably most) were removed and the exhaust ports plugged. No harm, and as I understand it, your '68 is exempt under California law. Might want to hang onto all the bits & pieces, though. The law probably won't be changed, but someone somewhere might be able to use that stuff.
__________________
- Mike -

1972 K20 LWB 350/350/205

RIP El Jay
Stocker is offline   Reply With Quote
Old 10-28-2016, 07:19 PM   #6
57larry
Registered User
 
Join Date: Nov 2007
Location: Indianapolis
Posts: 1,161
Re: Help Identifying. Odd Part on my '68

air pump. take it off
57larry is offline   Reply With Quote
Old 10-28-2016, 07:37 PM   #7
davepl
Registered User
 
davepl's Avatar
 
Join Date: Aug 2006
Location: Redmond, WA
Posts: 6,332
Re: Help Identifying. Odd Part on my '68

Why take it off? It serves a purpose (if it still works) and doesn't take any power. Plus your carb and dist could be calibrated to expect it there (though it's absence shouldn't really matter).

Nothing wrong with smog equipment that doesn't compromise performance, and this is just injecting air in to the exhaust pipe AFTER you're done with it, it doesn't hurt perf. Takes about 1/10th of a hp to spin it, probably.
__________________
1970 GMC Sierra Grande Custom Camper - Built, not Bought
1969 Pontiac 2+2 427/390 4-speed Coupe
1969 Pontiac 2+2 427/390 4-speed Convertible
davepl is offline   Reply With Quote
Old 10-28-2016, 11:11 PM   #8
Stocker
20' Daredevil (Ret)
 
Stocker's Avatar
 
Join Date: May 2003
Location: Jefferson State
Posts: 13,722
Re: Help Identifying. Odd Part on my '68

My only personal experience with those goes way back to late 1967. I bought a '68 Camaro with a 327, 4-speed, and that A.I.R. pump. I lived in Oregon and it was legal to remove those -- and in my youth, I suspected it might take a *little* bit of horsepower to operate, so why not?

One thing I noticed about the car was when you released the throttle to shift, the engine "sneezed" for lack of a better word. I think it happened mainly before the engine was fully warmed up. After I removed the pump & plumbing, the sneeze went away.

Dunno the significance of that, just passing along what I remembered of it.

I heard of a lot of those pumps being disabled by removing the belt. After awhile the pump would seize, possibly due to exhaust gases migrating from the manifolds to the pump.
__________________
- Mike -

1972 K20 LWB 350/350/205

RIP El Jay
Stocker is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:21 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com