67-72 C10 Identifying Bolts and their locations

[NandoCuzz]

What going on out there???! I own a 1967 c10 was a long bed cut the bed and frame. Anyways when I pulled the truck apart I bag and tagged everything. I noticed their were mixed matched bolts and I'm going thru cleaning and restoring parts. I bought the assembly manual but nothing about the bolt. Is there a list/pictures with measurements for bolts and where they go?

Thanks

[7tee]

If you log on to LMC trucks and look through their catalog online it will show you the bolt locations but not the size. You can order anything you want, hope this helps a little...Ed

[NandoCuzz]

How you doing 7tee? I don't want to buy new bolts from LMC I have a 5 gallon bucket from 2 c10 truck full of oem hardware. I just want to know what pacifist bolt goes in what location. I just want to make sure

Thanks

[zicc1835]

Originally Posted by NandoCuzz

How you doing 7tee? I don't want to buy new bolts from LMC I have a 5 gallon bucket from 2 c10 truck full of oem hardware. I just want to know what pacifist bolt goes in what location. I just want to make sure

Thanks

welcome ....and i feel your pain what i have the luxury of doing is looking at one of my other trucks and hope me or the PO did the right thing u got to take lots of pictures when you take them apart if your old like me
jz

[NandoCuzz]

zicc1835 i took tons of photos! someone before me took it apart and put whatever bolt fit. thats a good idea ill go look at my dad's truck and take out a few bolts and match them up.

thanks agin

[Deer_hunter_088]

Just a fyi uour local hardware stoor probably sells bolts that are newer that fit. I bought a crap ton of bolts of all sizes and used some to change my doors from philips to hex head. Makes changing door guts 100000000x easier. And its a good replacement for a worn out oem bolt yknow. Just my .02

[zicc1835]

Originally Posted by Deer_hunter_088

Just a fyi uour local hardware stoor probably sells bolts that are newer that fit. I bought a crap ton of bolts of all sizes and used some to change my doors from philips to hex head. Makes changing door guts 100000000x easier. And its a good replacement for a worn out oem bolt yknow. Just my .02

great advice here is whats going back in my frame to replace all them rivets SS hex locnut