4.3 Engines. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**crossy** · 03-25-2004, 11:09 AM

I have a nearly complete 1994 4.3 Roller HO engine , just the engine, that needs rebuild . #1 rod bearing went bad . Nothing came apart, crank still serviceable. $125.
I also have a complete TBI ,standard 4.3 that runs well, holds 70 PSI oil pressure. The engine was a crate replacement at some point in this Jimmy's history and the whole truck has 132K on it so the engine can't have too many miles on it . You can still hear it run before i disassemble the S15 Jimmy. $700. email me at all4trux@snip.net and please be specific in the subject box. don't Use PM as it gets sent to my SPAM folder for some reason.
Pennsville is right near Wilmington , DE. and 30 minutes south of Philly. DAVE

03-25-2004, 11:09 AM	#1
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	4.3 Engines. I have a nearly complete 1994 4.3 Roller HO engine , just the engine, that needs rebuild . #1 rod bearing went bad . Nothing came apart, crank still serviceable. $125. I also have a complete TBI ,standard 4.3 that runs well, holds 70 PSI oil pressure. The engine was a crate replacement at some point in this Jimmy's history and the whole truck has 132K on it so the engine can't have too many miles on it . You can still hear it run before i disassemble the S15 Jimmy. $700. email me at all4trux@snip.net and please be specific in the subject box. don't Use PM as it gets sent to my SPAM folder for some reason. Pennsville is right near Wilmington , DE. and 30 minutes south of Philly. DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.