58-59 headlight metal photo

[OrrieG]

I was out looking at the truck fenders and each as a different radius or sharpness to the top eyebrow edge of the fender above the headlight. Both fenders had rust in that area and I shaped them independently. I looked and could not find a good close up so I can tell which I need to change.

Could someone with a light colored truck take a good close up 3/4 angle photo of that area and post it? My passenger side has flat eyebrow with a tight radius at the top, drivers larger radius. Thanks in advance.

[Foot Stomper]

I hope this helps OrrieG.
I have the drivers side cut out in my shop so I can take more detailed pictures if you'd like. It's an original fender so far as I can tell.

[OrrieG]

Thanks, a closer shot would help, I am trying to see how tight the top radius should be. No hurry, temps here are heading into the 30's so will not be doing much body work.

[58CameoAZ]

Hey Orrie, I will try and take a Picture of the two fenders i just media blasted
when i get home tonight for you.

Allen

[_Ogre]

my photobucket account has 1000s of pics in it
http://s306.photobucket.com/user/_og...%20shoot/story

[58CameoAZ]

Orrie,

Are you maybe looking for a pic of the headlight bucket without the trim ring for the headlights installed? that is were my fenders are at right now (no headlight bucket installed)
Ogre, Love that "Yellow"!!!!
Allen

[OrrieG]

Thanks, I think the passenger one I did is not "soft" enough, time to get out the body file, which would make sense because it was the one I had to do the most work on.

[Foot Stomper]

OrrieG...does this help?