![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
![]() Join Date: Mar 2014
Location: Toano, VA
Posts: 853
|
Pulley alignment... seems I'm way off....
Put the power steering pump on which has a new but stock pulley. Same stock pulleys but new harmonic balancer. I'll attach some photos.
What do I do? Can I space out the pulleys at the balancer to make them aligned? Posted via Mobile Device |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Mar 2014
Location: Toano, VA
Posts: 853
|
The balancer is all the way in. Any further and I can't set timing accurately.
Posted via Mobile Device |
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: May 2016
Location: Sackets harbor ny
Posts: 282
|
Re: Pulley alignment... seems I'm way off....
I had a similar problem. Those aftermarket timing tabs. Are made for different applications. I had to buy a different one from jegs. That didn't come out that far. I didn't research the different applications for harmonic balancers. But that cured the problem for me. But I believe the harmonic balancer should be on all the way. Hope this helps. Good luck.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|