![]() |
Register or Log In To remove these advertisements. |
|
|
|
|||||||
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 |
|
Registered User
![]() Join Date: Jan 2015
Location: pembroke pines, fl
Posts: 711
|
how wide of wheels can be done in the rear
Iam getting ready to purchase a 1997 ext cab. was goin to do a 6-8 drop and run 22x8 front and 22x12 in rear also with a shorten rear in to get more lip in the rear wheel, question is how wide can i go before hitting the inner bed or leaf spring or will i have to go to a 22x10 or 10.5. thanks all
|
|
|
|
|
|
#2 |
|
Junior Member
![]() Join Date: Apr 2012
Location: Falls Church Va
Posts: 86
|
Re: how wide of wheels can be done in the rear
I have 10 in wide wheels with 275 tires on my truck with the back lowered 7 in. I think the backspace on the wheels is 5.5 in. I had to trim/roll my fender lips some to get the wheels to fit but they fit great now. 12 wide wheel might be possible but it would be real close, i don't have much clearance to the inner fender well with my wheels.
|
|
|
|
|
|
#3 |
|
Registered User
Join Date: Apr 2013
Location: GUNTERSVILLE
Posts: 621
|
Re: how wide of wheels can be done in the rear
http://www.wheel-size.com/calc/?whee...=30mm&scl=50mm
Take few minutes to take a couple of measurements and you can play with all the different combos. |
|
|
|
|
|
#4 |
|
Registered User
![]() Join Date: Jan 2015
Location: pembroke pines, fl
Posts: 711
|
Re: how wide of wheels can be done in the rear
thanks fellas ,much appreciated
|
|
|
|
![]() |
| Bookmarks |
|
|