Part pricing help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

that_red_c10 · 12-06-2016, 09:55 PM

I've decided that I want to start to get my truck pulled apart and I want to put on the correct parts that it had in 68', rather than the 71/72 gmc front clip I have on plus some other parts, so I just want to get an estimate as to how much they will cost in decent shape (OEM only).

I need:
68' Front Clip, pretty much the whole clip minus the hood. I will need all chrome as well.

Not absolutely necessary but I might need 8ft fleetside bedsides, I will need a tailgate.

I will probably need doors as well.

And just in case I decide to just swap my parts onto a less rusty truck, roughly how much would a stripped rust free cab with title cost?

Again I'm looking for just an estimation as to how much I'm looking to spend for each lol. If anyone's purchased the things I'm looking for, how much did you pay for them if you don't mind me asking?

Overdriven · 12-06-2016, 11:59 PM

I saw a complete 67 or 68 Chevy front clip on Craigslist upstate about a year ago for $600. Think he had bedsides for another $250.

Not sure what you'd be swapping onto a less rusty truck, sounds like you want to replace everything but the frame!

that_red_c10 · 12-08-2016, 03:05 PM

Haha I might need one of them too! Lol. The parts I have arent that bad (minus the 68' clip which I dont have at all), but I'd just want to see if it's worth my time fixing the part or just getting a new one.

**Already Gone** · 12-08-2016, 03:22 PM

There is board member "lane224" that parts out trucks and he is in New York State, doesn't say where in his profile,and he may have what you need for original parts. You can find his posts in the for sale section on here.

that_red_c10 · 12-08-2016, 03:36 PM

Oh that'/ great! Thanks for the info! I'll have to see if I can find him on here

**Already Gone** · 12-08-2016, 04:26 PM

Quote:

Originally Posted by that_red_c10

Oh that'/ great! Thanks for the info! I'll have to see if I can find him on here

Here is one of his posts.

http://67-72chevytrucks.com/vboard/s...66#post7790666

that_red_c10 · 12-08-2016, 05:58 PM

Thank you!

**70STOVEBOLT** · 12-08-2016, 10:51 PM

FYI 68-72 GMC and 68 Chevy fenders and hood are the same.

volksworld · 12-10-2016, 11:49 AM

having lived in the wonderful world of road salt and coastal flooding, half the battle is that most of the stuff in your area is rusty crap....and the good stuff is in the southwest....so now you have the challenge of getting large pieces of delicate sheetmetal cross country without damage....which isnt cheap....so the going rate of a good clip in kansas is nowhere near what you'll be paying for one on long island....back in the day i wound up buying an oklahoma truck at carlisle for my body swap...it was cheaper than the individual pieces would have been...so if theres that much wrong with the truck you have,you may be better off flipping it and buying something else

Jrainman · 12-10-2016, 12:32 PM

I agree with Volksworld . he is spot on .being I am not that far from LI I understand what he is saying. the only other option would be to buy a finished restored truck, in the end it would most likly be cheeper ...

but if you enjoy the building aspect , then you will have to deal with the north east builders syndrone of looking for solid sheet metal..

And also dont be suprised if you dont end up with 2 or 3 trucks worth of parts after your build. (somtimes you need to buy a entire truck to get what you need) good luck have fun .

12-06-2016, 09:55 PM	#1
that_red_c10 Registered User Join Date: Jan 2015 Location: Long Island, New York Posts: 245	Part pricing help I've decided that I want to start to get my truck pulled apart and I want to put on the correct parts that it had in 68', rather than the 71/72 gmc front clip I have on plus some other parts, so I just want to get an estimate as to how much they will cost in decent shape (OEM only). I need: 68' Front Clip, pretty much the whole clip minus the hood. I will need all chrome as well. Not absolutely necessary but I might need 8ft fleetside bedsides, I will need a tailgate. I will probably need doors as well. And just in case I decide to just swap my parts onto a less rusty truck, roughly how much would a stripped rust free cab with title cost? Again I'm looking for just an estimation as to how much I'm looking to spend for each lol. If anyone's purchased the things I'm looking for, how much did you pay for them if you don't mind me asking? __________________ Red 1968 Chevy C10: 4bbl 350 v8 1984 Chevrolet Corvette Crossfire 350 1987 Chevrolet Camaro 305 4bbl 1993 Chevrolet Cavalier RS Convertible 3.1L V6 1982 Chrysler LeBaron Convertible Marc Cross Edition

12-06-2016, 11:59 PM	#2
Overdriven Registered User Join Date: Mar 2016 Location: Long Island NY Posts: 598	Re: Part pricing help I saw a complete 67 or 68 Chevy front clip on Craigslist upstate about a year ago for $600. Think he had bedsides for another $250. Not sure what you'd be swapping onto a less rusty truck, sounds like you want to replace everything but the frame!

12-08-2016, 03:05 PM	#3
that_red_c10 Registered User Join Date: Jan 2015 Location: Long Island, New York Posts: 245	Re: Part pricing help Haha I might need one of them too! Lol. The parts I have arent that bad (minus the 68' clip which I dont have at all), but I'd just want to see if it's worth my time fixing the part or just getting a new one. __________________ Red 1968 Chevy C10: 4bbl 350 v8 1984 Chevrolet Corvette Crossfire 350 1987 Chevrolet Camaro 305 4bbl 1993 Chevrolet Cavalier RS Convertible 3.1L V6 1982 Chrysler LeBaron Convertible Marc Cross Edition

12-08-2016, 03:22 PM	#4
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,143	Re: Part pricing help There is board member "lane224" that parts out trucks and he is in New York State, doesn't say where in his profile,and he may have what you need for original parts. You can find his posts in the for sale section on here. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

12-08-2016, 03:36 PM	#5
that_red_c10 Registered User Join Date: Jan 2015 Location: Long Island, New York Posts: 245	Re: Part pricing help Oh that'/ great! Thanks for the info! I'll have to see if I can find him on here __________________ Red 1968 Chevy C10: 4bbl 350 v8 1984 Chevrolet Corvette Crossfire 350 1987 Chevrolet Camaro 305 4bbl 1993 Chevrolet Cavalier RS Convertible 3.1L V6 1982 Chrysler LeBaron Convertible Marc Cross Edition

12-08-2016, 05:58 PM	#7
that_red_c10 Registered User Join Date: Jan 2015 Location: Long Island, New York Posts: 245	Re: Part pricing help Thank you! __________________ Red 1968 Chevy C10: 4bbl 350 v8 1984 Chevrolet Corvette Crossfire 350 1987 Chevrolet Camaro 305 4bbl 1993 Chevrolet Cavalier RS Convertible 3.1L V6 1982 Chrysler LeBaron Convertible Marc Cross Edition

12-08-2016, 10:51 PM	#8
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: Part pricing help FYI 68-72 GMC and 68 Chevy fenders and hood are the same. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

12-10-2016, 11:49 AM	#9
volksworld Registered User Join Date: Apr 2011 Location: formerly NY currentlyNC Posts: 390	Re: Part pricing help having lived in the wonderful world of road salt and coastal flooding, half the battle is that most of the stuff in your area is rusty crap....and the good stuff is in the southwest....so now you have the challenge of getting large pieces of delicate sheetmetal cross country without damage....which isnt cheap....so the going rate of a good clip in kansas is nowhere near what you'll be paying for one on long island....back in the day i wound up buying an oklahoma truck at carlisle for my body swap...it was cheaper than the individual pieces would have been...so if theres that much wrong with the truck you have,you may be better off flipping it and buying something else __________________ 1970 short step c10 leaf spring 454

12-10-2016, 12:32 PM	#10
Jrainman Registered User Join Date: Jul 2015 Location: North East PA Posts: 684	Re: Part pricing help I agree with Volksworld . he is spot on .being I am not that far from LI I understand what he is saying. the only other option would be to buy a finished restored truck, in the end it would most likly be cheeper ... but if you enjoy the building aspect , then you will have to deal with the north east builders syndrone of looking for solid sheet metal.. And also dont be suprised if you dont end up with 2 or 3 trucks worth of parts after your build. (somtimes you need to buy a entire truck to get what you need) good luck have fun .



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.