![]() |
|
![]() |
#1 |
Sisyphus was my mentor!
![]() Join Date: Sep 2002
Location: Carleton Place, Ontario CANADA
Posts: 984
|
I'm getting ready to redo my steel bedfloor. my factory bedfloor is rotted in the usual places - overtop of each crosspiece. So I'm going to cut strips from my donor bedfloor & weld them in. I'm aware that repop cross pieces are expensive & I was realizing that the reason the bed rusted out in the first place was because the cross pieces are open at the top.... I figured that making my own crosspieces from square tubing will eliminate my rust problem & make it stronger overall. I just gotta slip down to Brunswick Steel & get the right diameters.
__________________
passthebuck ![]() #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car |
![]() |
![]() |
![]() |
Bookmarks |
|
|