|
12-20-2016, 03:02 AM
|
#1 |
|
Registered User
Join Date: Aug 2012
Location: Lemoore, Ca
Posts: 138
|
Lower fender bolts
Hey people, I'm looking for the bolt size for the lower rear fender bolt on the front fender of a 1955.2 chevy. Need to bolt fenders down.....the previous owner had wire to hold them in place.
I don't want to carry the whole fender into the hardware store to match up the nut to a bolt, and can't find it online anywhere. Thanks |
|
|
|
12-20-2016, 04:12 AM
|
#2 |
|
Registered User
Join Date: Aug 2012
Location: Lemoore, Ca
Posts: 138
|
Re: Lower fender book
Oops...just realized the posting is titled ...'book'....it should be "BOLT"
|
|
|
|
|
12-20-2016, 02:01 PM
|
#3 |
|
Registered User
Join Date: Dec 2011
Location: Belgium
Posts: 82
|
Re: Lower fender book
on my '56 it's a 3/8-16 UNC bolt.
__________________
'56 Chevy stepside shortbed SBC350 - TH350 12-bolt rear |
|
|
|
|
12-20-2016, 02:30 PM
|
#4 |
|
Registered User
Join Date: Aug 2012
Location: Lemoore, Ca
Posts: 138
|
Re: Lower fender book
Thnx iceman.....I'll give that a try
|
|
|
|
|
12-20-2016, 11:50 PM
|
#5 |
|
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,337
|
Re: Lower fender book
bolts are pretty cheap. maybe buy a few fine thread as well. my truck seems to have a mix of fine and course depending on what is still stock compared to what has been jury rigged by the farmer. you can always take back what you didn't use, right?
|
|
|
|
|
12-21-2016, 02:23 AM
|
#6 |
|
Registered User
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,715
|
Re: Lower fender book
You probably have one in the bolt bucket that you can trial fit to make sure what diameter and thread it is but I'd think 3/8 SAE or USS (Course/fine) would be the right one.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
12-21-2016, 01:34 PM
|
#7 |
|
Registered User
Join Date: Apr 2015
Location: Enid OK
Posts: 85
|
Re: Lower fender book
Mine is a 54 but better get the "giant" "fender washers" as well to keep from pulling through the slotted holes. As I recall on mine, there was the clutch head style bolts with no washers going from inside the bed, the fender washers, lock washers, and nuts.
|
|
|
|
|
12-21-2016, 11:47 PM
|
#8 |
|
Registered User
Join Date: Dec 2011
Location: Moxee WA
Posts: 1,482
|
Re: Lower fender book
do you have a tap & die set ? I find running a tap in is an easy way to find the correct bolt & it also cleans up the threads
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
