Found clipped wires. Where do they go? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bagged91 · 03-25-2004, 11:50 PM

Seems the P.O. decided to "install" his own anti theft devise in the 72 Burb. He left the keys in the ignition and decided to clip wires back by the distributor...

I found he clipped a green wire that appears to have run to the Oil sending unit. There was a yellow wire going to the + side of the coil that was clipped. The wire going from the - side of the coil to the distributor was clipped. Now, there is a black wire with a white stripe that is running across the top of the firewall that is clipped and appears to tie into the wrapped harness that comes out by the AC box. Also in that harness is a larger(12 ga.?) ORANGE wire that is clipped off. Coming out of the grommet where the oil pressure line goes through the firewall is another ORANGE wire that is thinner than the other orange wire(16 ga.?). What did these go to? I don't have a wiring diagram for this truck so if anyone has one and can send me a pic of it that would be great.

Again, this is for a 72' C20 Burb, 402, T400, A/C, with fact. guages.

Any help would be great! Trying to get it running before I yank the drivetrain...

JimKshortstep4x4 · 03-26-2004, 09:56 AM

Sounds like you have a mess!

Good luck, here is a link for the diagrams.

Jim

http://www.geocities.com/chevroletc1070/wiringdias.html

bagged91 · 03-27-2004, 04:06 PM

Thanks!

03-25-2004, 11:50 PM	#1
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Found clipped wires. Where do they go? Seems the P.O. decided to "install" his own anti theft devise in the 72 Burb. He left the keys in the ignition and decided to clip wires back by the distributor... I found he clipped a green wire that appears to have run to the Oil sending unit. There was a yellow wire going to the + side of the coil that was clipped. The wire going from the - side of the coil to the distributor was clipped. Now, there is a black wire with a white stripe that is running across the top of the firewall that is clipped and appears to tie into the wrapped harness that comes out by the AC box. Also in that harness is a larger(12 ga.?) ORANGE wire that is clipped off. Coming out of the grommet where the oil pressure line goes through the firewall is another ORANGE wire that is thinner than the other orange wire(16 ga.?). What did these go to? I don't have a wiring diagram for this truck so if anyone has one and can send me a pic of it that would be great. Again, this is for a 72' C20 Burb, 402, T400, A/C, with fact. guages. Any help would be great! Trying to get it running before I yank the drivetrain... __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

03-27-2004, 04:06 PM	#3
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Thanks! __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

03-26-2004, 09:56 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Sounds like you have a mess! Good luck, here is a link for the diagrams. Jim http://www.geocities.com/chevroletc1070/wiringdias.html



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.