Trans crossmember removal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jayred · 12-30-2016, 02:21 PM

All set. BFH worked hitting each end in opposite directions. The rivets in the way were the ones for the cab mounts for the frame. I could have used a grinder on the two most rearward rivets but I hate grinding under a truck next to fuel lines and making a mess. I'm just gonna notch a little on the crossmember and call it a day. Thanks for the help, can't wait to try out the new 3 speed!
Posted via Mobile Device

12-30-2016, 02:21 PM	#3
Jayred Registered User Join Date: Mar 2015 Location: Phoenix, AZ Posts: 30	All set. BFH worked hitting each end in opposite directions. The rivets in the way were the ones for the cab mounts for the frame. I could have used a grinder on the two most rearward rivets but I hate grinding under a truck next to fuel lines and making a mess. I'm just gonna notch a little on the crossmember and call it a day. Thanks for the help, can't wait to try out the new 3 speed! Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.