|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-09-2017, 02:57 AM
|
#1 |
|
Registered User
Join Date: Feb 2013
Location: Grants Pass Oregon
Posts: 473
|
Power steering box tab removal
This question is about the removal of the tabs on my power steering box. I've been looking at them for years now and finally decided to cut them off to clean up the box. When I open the front tilt clip the box is right in front. But before I do any hacking and grinding it would be nice to know if there are voids or hollow spots under the tabs. Anybody know?.
Thanks Earl
__________________
You have to have patiences or you'll be one. |
|
|
|
01-09-2017, 03:35 AM
|
#2 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,345
|
Re: Power steering box tab removal
It's been 40 years since I had one of those apart but I don't think that they have any hollow areas or passages. I've always thought that they were there to hold the box in a fixture for either machining or assembly or both.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
01-09-2017, 04:31 AM
|
#3 |
|
Registered User
Join Date: Feb 2013
Location: Grants Pass Oregon
Posts: 473
|
Re: Power steering box tab removal
Hey mr48chev. Thats what I was thinking. That power steering box and the T5 are the only parts of CJ that I havent taken apart to repair. I'm waiting for just a little bit of better weather to do this job but eventuality I will find out.
Earl
__________________
You have to have patiences or you'll be one. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
