|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-10-2017, 03:52 AM
|
#1 |
|
Registered User
Join Date: Jun 2013
Location: Richland, WA
Posts: 85
|
Will this C20 power brake unit fit my c10?
Hi everyone,
I have a 1967 c10 with manual brakes. I have the chance to pick up the power brake canister, master cylinder & mounting hardware & rods off of a 68 c20 that looks in almost new condition. The canister is smaller in diameter & thicker than the canisters I usually see on c10's. I was hoping to use my present master cylinder without unhooking the lines and attempting to install the canister & mount behind it. My questions: 1. Anyone familiar with these know whether this would fit on my truck and install on to my master cylinder? 2. If it wouldn't fit, would the mount that goes on to the firewall fit & could I purchase a canister for a c10 & install it on the c20 mount? All help appreciated! |
|
|
|
01-10-2017, 08:38 AM
|
#2 |
|
Registered User
 
Join Date: May 2013
Location: WEST PALM FLORIDA
Posts: 1,174
|
Re: Will this C20 power brake unit fit my c10?
I think you will be fine with that booster , make sure the plunger rod goes in the master the same length as the one replacing it , there are 2 different depths
__________________
68 Long Fleet , ly6 , turbo 350 , 3-5 drop , original paint , front discs 67 Small window , 7 foot bed , tweaked 6.0 LSX 2004R Medium Olive 58 Apache fleet , 235 , offy intake , dual exhaust , 4 on the floor , red/white 69 Long Fleet , Custom , 6.0, 4l60 , AC , Medium Olive |
|
|
|
|
01-10-2017, 05:57 PM
|
#3 |
|
Registered User
Join Date: Dec 2009
Location: El Dorado Ca
Posts: 3,374
|
Re: Will this C20 power brake unit fit my c10?
I wouldnt mix parts like that
|
|
|
|
|
01-10-2017, 07:15 PM
|
#4 | |
|
Moderator
 
Join Date: May 2007
Location: Southern Cal
Posts: 19,995
|
Re: Will this C20 power brake unit fit my c10?
Quote:
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man |
|
|
|
|
|
01-10-2017, 08:35 PM
|
#5 |
|
Registered User
Join Date: Apr 2015
Location: East Tn (In the heart of the Smoky Mtns)
Posts: 1,858
|
Re: Will this C20 power brake unit fit my c10?
You need the whole Power brake unit, with the plunger Rod. Use the pro portioning block in accordance with your brake setup
|
|
|
|
|
01-10-2017, 11:37 PM
|
#6 |
|
Registered User
Join Date: Jun 2013
Location: Richland, WA
Posts: 85
|
Re: Will this C20 power brake unit fit my c10?
Thank you everyone for the advice & help. I'll see if I can move the master cylinder over & slip it in. If it looks dicey, I can pull it back out of the way & put the master cylinder back.
Thanks again! |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
