4 speed column conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

beaterC10 · 03-25-2004, 11:11 PM

I have been looking without success to find a floor shift tilt column for my 83. I contacted the guy on ebay that sells rebuilt columns, he doesn't have one for an 83. The 84-87 column he just sold went for over $200.

I'm now looking for a way to convert my column shift tilt column into a floor shift column.

I found out the switch bowl is interchangeable for most of GM and some Jeep tilt columns from 77-92. Since that much interchanges and it is a GM part, seems like there is some chance for interchange in some of the rest of the parts.

I am making the assumption I can use the original truck steering shaft and tilt knuckle and replace the shifter related parts with the equivalent parts from a floor shift column.

The likely candidates look to be Jeep Wrangler and Firebirds. They seem to go cheap, are commonly floor shift, and look similar to a truck column. Has anyone tried this?

The other option is knock the shifter pin out, lop the shifter boss off, and bondo the resulting hole.

Any other ideas?

stepside71 · 03-25-2004, 11:18 PM

dealer item perhaps ?

**swervin ervin** · 03-25-2004, 11:50 PM

Here's what I did.

Shiftlight

beaterC10 · 03-26-2004, 10:07 AM

what is that on the column, a shift light?

**swervin ervin** · 03-26-2004, 11:18 AM

Yes.

http://www.73-87.com/7387garage/inte...shiftlight.htm

85Silverado · 03-28-2004, 02:10 AM

Hey, I have a '78...will a newer (84-87) tilt column fit in place of my current non tilt?

beaterC10 · 03-29-2004, 09:51 AM

It would bolt in, but the problem is wiring. 1984 has the wipers and dimmer on the column, 1983 has the wipers and dimmer on the dash.

03-25-2004, 11:11 PM	#1
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	4 speed column conversion I have been looking without success to find a floor shift tilt column for my 83. I contacted the guy on ebay that sells rebuilt columns, he doesn't have one for an 83. The 84-87 column he just sold went for over $200. I'm now looking for a way to convert my column shift tilt column into a floor shift column. I found out the switch bowl is interchangeable for most of GM and some Jeep tilt columns from 77-92. Since that much interchanges and it is a GM part, seems like there is some chance for interchange in some of the rest of the parts. I am making the assumption I can use the original truck steering shaft and tilt knuckle and replace the shifter related parts with the equivalent parts from a floor shift column. The likely candidates look to be Jeep Wrangler and Firebirds. They seem to go cheap, are commonly floor shift, and look similar to a truck column. Has anyone tried this? The other option is knock the shifter pin out, lop the shifter boss off, and bondo the resulting hole. Any other ideas?

03-25-2004, 11:18 PM	#2
stepside71 Project Money Pit Join Date: Jan 2004 Location: Pensacola Florida Posts: 90	dealer item perhaps ? __________________ For sale: GMC rad support $50, L/F 69-72 fender $50, (1) 69-72 & 67-68 Chevy hood $50 ea.,1 disc brake spindles w/ calipers and rotors $ 25 WTB: (1) R/F inner fender. OR will trade

03-25-2004, 11:50 PM	#3
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Here's what I did. Shiftlight __________________ Mike 1985 Chevy C-10 Last edited by swervin ervin; 03-25-2004 at 11:55 PM.

03-28-2004, 02:10 AM	#6
85Silverado Registered User Join Date: Dec 2002 Location: Milwaukee, Wisconsin Posts: 198	Hey, I have a '78...will a newer (84-87) tilt column fit in place of my current non tilt? __________________ Paul D. '78 C20 Scottsdale 350ci 3 speed with granny gear 14 bolt rearend My trucks are "Car-Guy safe".......which pretty much means death trap in the hands of a normal civilian.

03-26-2004, 10:07 AM	#4
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	what is that on the column, a shift light?

03-26-2004, 11:18 AM	#5
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Yes. http://www.73-87.com/7387garage/inte...shiftlight.htm

03-29-2004, 09:51 AM	#7
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	It would bolt in, but the problem is wiring. 1984 has the wipers and dimmer on the column, 1983 has the wipers and dimmer on the dash.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.