Dash Cluster

[Ramiro0727]

Originally Posted by Ramiro0727

88Stanger yes the cluster wiring plug was plugged in when I took it off. I ended up making a new plug for the dash cluster. I didn't like the looks of the old one.

Here is my new cluster plug.

[Swedchevy67]

Originally Posted by Ramiro0727

Here is my new cluster plug.

Hi!
I just spotted you picture and that's what I am planning to do myself.
Did you just replace the wiring from AAW in the same order and collor?

[Ramiro0727]

Originally Posted by Swedchevy67

Hi!
I just spotted you picture and that's what I am planning to do myself.
Did you just replace the wiring from AAW in the same order and collor?

Swedchevy67 yes I replaced the wiring using the wiring from the AAW in the same color and order.

Ramiro

[Swedchevy67]

Originally Posted by Ramiro0727

Swedchevy67 yes I replaced the wiring using the wiring from the AAW in the same color and order.

Ramiro

With no problems?

[Ramiro0727]

Originally Posted by Swedchevy67

With no problems?

No problems at all.

[Swedchevy67]

I notice that youR nr 12 is empty? In mine I have nr 5 empty. I belive nr 12 is ground cable.

[Ramiro0727]

Originally Posted by Swedchevy67

I notice that youR nr 12 is empty? In mine I have nr 5 empty. I belive nr 12 is ground cable.

Swedchevy67 I followed the wiring diagram someone posted on here. Yes I believe I left nr 12 empty.

Ramiro

[LockDoc]

Originally Posted by Ramiro0727

Swedchevy67 I followed the wiring diagram someone posted on here. Yes I believe I left nr 12 empty.

Ramiro

I'm not out in the shop right now to check, but if nr12 is a ground wire it would probably be this one that the arrows are pointing to. It goes through part of the old harness.

LockDoc