OR Cleaning out the shop sale - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Blue/72** · 11-22-2016, 02:06 PM

Bump

ghalperin · 11-22-2016, 02:34 PM

Quote:

Originally Posted by Blue/72

$14 shipping

V8 exhaust brackets. I'm sorry, but I don't know where those go or what they do. I thought I could use them on my 250 to 396 conversion, but maybe not. What do they do and where do they go?

**Blue/72** · 11-22-2016, 02:40 PM

Quote:

Originally Posted by ghalperin

V8 exhaust brackets. I'm sorry, but I don't know where those go or what they do. I thought I could use them on my 250 to 396 conversion, but maybe not. What do they do and where do they go?

They are rear exhaust hangers that hold up the exhaust. The larger one goes in the main rear cross member and the small one goes on the frame rail

mackdaddy78 · 11-22-2016, 02:41 PM

Hi, Number 3 is the $10:00 for both of the emblems and shipping to 68135
Thanks

**Blue/72** · 11-22-2016, 02:47 PM

Quote:

Originally Posted by mackdaddy78

Hi, Number 3 is the $10:00 for both of the emblems and shipping to 68135
Thanks

Yes and I will check shipping here in just a few min

**raggedjim** · 11-22-2016, 02:55 PM

Pics of 18 gmc wheel cover

Is this in good shape? First in line depending on pics.

Rg

**Blue/72** · 11-22-2016, 04:29 PM

Quote:

Originally Posted by mackdaddy78

Hi, Number 3 is the $10:00 for both of the emblems and shipping to 68135
Thanks

Picture

**Blue/72** · 11-22-2016, 04:30 PM

Quote:

Originally Posted by raggedjim

Pics of 18 gmc wheel cover

Is this in good shape? First in line depending on pics.

Rg

In great shape

**raggedjim** · 11-22-2016, 04:55 PM

Is the center cap metal or plastic? If it's metal I'll take it just pm me the total cost shipped to 42071.

Thanks, Rg

BaggedBurban · 11-22-2016, 08:42 PM

Can I get a pic of the Suburban rear door panels?

Where are you located in Oregon?
Posted via Mobile Device

**Blue/72** · 11-22-2016, 09:25 PM

Quote:

Originally Posted by BaggedBurban

Can I get a pic of the Suburban rear door panels?

Where are you located in Oregon?
Posted via Mobile Device

I'm in Canby about 30 min south of Portland. I will take some in just a bit

**Blue/72** · 12-01-2016, 04:10 PM

Bump

**Blue/72** · 01-09-2017, 03:54 PM

Top

jhuerta81 · 01-09-2017, 04:51 PM

Pics of the seals? Set?

**Blue/72** · 01-09-2017, 05:33 PM

Yes it is a pair of LH and RH seals. I will post a picture shortly

**70STOVEBOLT** · 01-09-2017, 07:05 PM

Pics of the tail light bezels please and shipping to 46562.

Thanks, Mark

**Blue/72** · 01-09-2017, 07:52 PM

Shipping would be $17 so just call it $23 shipped if you want them

**Blue/72** · 01-09-2017, 07:53 PM

Quote:

Originally Posted by jhuerta81

Pics of the seals? Set?

Picture

**jpgl** · 01-09-2017, 11:14 PM

interested in exhaust hangers if ghalperin decides not to buy them thanx

**Blue/72** · 01-10-2017, 12:36 AM

Quote:

Originally Posted by jpgl

interested in exhaust hangers if ghalperin decides not to buy them thanx

They are yours if you want them, I haven't heard from him in a quite a while

**70STOVEBOLT** · 01-10-2017, 08:47 AM

I am going to pass on the tail light bezels, thanks for the pics. GLWS

**Blue/72** · 01-19-2017, 02:18 PM

Bump

11-22-2016, 02:06 PM	#26
Blue/72 Senior Member Join Date: Aug 2014 Location: Sandy, Oregon Posts: 2,381	Re: Cleaning out the shop sale Bump __________________ My dad always says that HEI distributers are pointless... •1972 Custom/10 Deluxe. My first truck and I've had it since I was 7. Tilt, tach, AM/FM, 350, deep dish rally's, original paint and an increasing amount of NOS jewelry. It's always taking my money.. •1967 c10 with tach, dropped 3/5 on deep dish rally's •1972 Cheyenne Super. Sold

11-22-2016, 02:41 PM	#29
mackdaddy78 Registered User Join Date: Jan 2006 Location: omaha Posts: 13	Re: Cleaning out the shop sale Hi, Number 3 is the $10:00 for both of the emblems and shipping to 68135 Thanks

11-22-2016, 02:55 PM	#31
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,513	Re: Cleaning out the shop sale Pics of 18 gmc wheel cover Is this in good shape? First in line depending on pics. Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743

11-22-2016, 04:55 PM	#34
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,513	Re: Cleaning out the shop sale Is the center cap metal or plastic? If it's metal I'll take it just pm me the total cost shipped to 42071. Thanks, Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743

11-22-2016, 08:42 PM	#35
BaggedBurban Registered User Join Date: Mar 2016 Location: Portland,OR Posts: 164	Re: Cleaning out the shop sale Can I get a pic of the Suburban rear door panels? Where are you located in Oregon? Posted via Mobile Device

12-01-2016, 04:10 PM	#37
Blue/72 Senior Member Join Date: Aug 2014 Location: Sandy, Oregon Posts: 2,381	Re: Cleaning out the shop sale Bump __________________ My dad always says that HEI distributers are pointless... •1972 Custom/10 Deluxe. My first truck and I've had it since I was 7. Tilt, tach, AM/FM, 350, deep dish rally's, original paint and an increasing amount of NOS jewelry. It's always taking my money.. •1967 c10 with tach, dropped 3/5 on deep dish rally's •1972 Cheyenne Super. Sold

01-09-2017, 03:54 PM	#38
Blue/72 Senior Member Join Date: Aug 2014 Location: Sandy, Oregon Posts: 2,381	Re: Cleaning out the shop sale Top __________________ My dad always says that HEI distributers are pointless... •1972 Custom/10 Deluxe. My first truck and I've had it since I was 7. Tilt, tach, AM/FM, 350, deep dish rally's, original paint and an increasing amount of NOS jewelry. It's always taking my money.. •1967 c10 with tach, dropped 3/5 on deep dish rally's •1972 Cheyenne Super. Sold

01-09-2017, 04:51 PM	#39
jhuerta81 Registered User Join Date: Apr 2013 Location: Texas Posts: 122	Re: Cleaning out the shop sale Pics of the seals? Set?

01-09-2017, 05:33 PM	#40
Blue/72 Senior Member Join Date: Aug 2014 Location: Sandy, Oregon Posts: 2,381	Re: Cleaning out the shop sale Yes it is a pair of LH and RH seals. I will post a picture shortly __________________ My dad always says that HEI distributers are pointless... •1972 Custom/10 Deluxe. My first truck and I've had it since I was 7. Tilt, tach, AM/FM, 350, deep dish rally's, original paint and an increasing amount of NOS jewelry. It's always taking my money.. •1967 c10 with tach, dropped 3/5 on deep dish rally's •1972 Cheyenne Super. Sold

01-09-2017, 07:05 PM	#41
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: Cleaning out the shop sale Pics of the tail light bezels please and shipping to 46562. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-09-2017, 07:52 PM	#42
Blue/72 Senior Member Join Date: Aug 2014 Location: Sandy, Oregon Posts: 2,381	Re: Cleaning out the shop sale Shipping would be $17 so just call it $23 shipped if you want them Attached Images __________________ My dad always says that HEI distributers are pointless... •1972 Custom/10 Deluxe. My first truck and I've had it since I was 7. Tilt, tach, AM/FM, 350, deep dish rally's, original paint and an increasing amount of NOS jewelry. It's always taking my money.. •1967 c10 with tach, dropped 3/5 on deep dish rally's •1972 Cheyenne Super. Sold

01-09-2017, 11:14 PM	#44
jpgl Junior Member Join Date: May 2016 Location: Regina, Saskatchewan Posts: 83	Re: Cleaning out the shop sale interested in exhaust hangers if ghalperin decides not to buy them thanx

01-10-2017, 08:47 AM	#46
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: Cleaning out the shop sale I am going to pass on the tail light bezels, thanks for the pics. GLWS __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-19-2017, 02:18 PM	#47
Blue/72 Senior Member Join Date: Aug 2014 Location: Sandy, Oregon Posts: 2,381	Re: Cleaning out the shop sale Bump __________________ My dad always says that HEI distributers are pointless... •1972 Custom/10 Deluxe. My first truck and I've had it since I was 7. Tilt, tach, AM/FM, 350, deep dish rally's, original paint and an increasing amount of NOS jewelry. It's always taking my money.. •1967 c10 with tach, dropped 3/5 on deep dish rally's •1972 Cheyenne Super. Sold



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.