Porterbuilt engine mounts. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ol_skool_chevy · 01-25-2017, 01:02 AM

I have a level 3 drop member with a BBC mounts. Is there suppose to be a spacer here where my finger is between? seem like there should be one but I looked all through my bolts and parts and there were none to be had. If so I need them ASAP

contagious102 · 01-26-2017, 11:15 AM

I would just cut a piece of 1/2" pipe and insert it between there to stiffing the mount. Good to go, can't hurt any thing , has to make it stronger . I'm sure those holes are there for different mounting options.

01-25-2017, 01:02 AM	#1
ol_skool_chevy Registered User Join Date: May 2010 Location: Hillsboro, Oregon 97123 Posts: 1,300	Porterbuilt engine mounts. I have a level 3 drop member with a BBC mounts. Is there suppose to be a spacer here where my finger is between? seem like there should be one but I looked all through my bolts and parts and there were none to be had. If so I need them ASAP Attached Images __________________ Measure with a yard stick Mark with Chalk Cut with a torch Built it yourself, don't count on others to to do it for you or with you. It will never get done

01-26-2017, 11:15 AM	#2
contagious102 Registered User Join Date: May 2012 Location: Semmes,Al. Posts: 407	Re: Porterbuilt engine mounts. I would just cut a piece of 1/2" pipe and insert it between there to stiffing the mount. Good to go, can't hurt any thing , has to make it stronger . I'm sure those holes are there for different mounting options. __________________ Go Fast and Have Fun.!! My pro street build, http://67-72chevytrucks.com/vboard/s...d.php?t=551185



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.