![]() |
![]() |
#1 |
Registered User
Join Date: Feb 2016
Location: North West, MT
Posts: 53
|
72 Door Question
Have a question about the lower doors on the 72. Should they be flat/straight across the bottom of the door. Pic #1 is of the door that I replaced the lower half door skin, I ran it straight across door. Pic #2/#3 of passenger side door, the outer edges have a downward concave to them. Which one is correct??
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2009
Location: San Antonio, Texas
Posts: 1,376
|
Re: 72 Door Question
Both of my original doors have the inward curve at outside edges. I have some pictures I took when I was working on them, I can post if you like.
__________________
1972 C10 LWB, 350/350 Deconstruction began 5/2009, mostly completed restoration, 5/2017 |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2016
Location: North West, MT
Posts: 53
|
Re: 72 Door Question
Thanks for the reply. I was afraid that they did have an inward curve. Just wanted to check before I did any more body work. Will not need any pics, will just wait until I can test fit the doors on the cab, and go from there.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|